User guide

Developers guidelines | AT commands
42 June 2010
Ensemble C4: Interface commands
Commands
ATE Command echo (ver. 2)
<cld> Description
String type Phone number of format specified by <ton>
<ton>: Integer. Type of address octet (refer GSM 04.08 section 10.5.4.7).
<ton> Description
129 ISDN/telephony numbering plan, national/
international unknown. Default value if “+” is not
in <sca>
145 ISDN/telephony numbering plan, international
number. Default value if “+” is in <sca>
161 ISDN/telephony numbering plan, national number
128–255 Other values refer GSM 04.08 section 10.5.4.7
Description: Determines if the DCE echoes characters received from the DTE during
command state and online command state.
Set command: ATE[<value>]
Read command: ATE? Displays the current <value> setting.
Test command: ATE=? Shows if the command is supported.
Test command
response: E: (list of supported <value>s)
Parameter:
<value>:
<value> Description
0 DCE does not echo characters during command
state and online command state
1 DCE echoes characters during command state and
online command state. Default value