User guide

Developers guidelines | AT commands
46 June 2010
ATQ Result code suppression (ver. 2)
ATV DCE response mode (ver. 2)
Description: The setting of this parameter determines whether or not the DCE transmits
result codes to the DTE. When result codes are being suppressed, no
portion of any intermediate, final or unsolicited result code (header, result
text, line terminator or trailer) is transmitted.
Set command: ATQ[=]<value>
Read command: ATQ? Displays the current <value> setting.
Read command
response: Q: <value>
Test command: ATQ=? Shows if the command is supported.
Test command
response: Q: (list of supported <value>s)
Parameter:
<value>:
<value> Description
0 DCE transmits result codes. Default value
1 Result codes are suppressed and not transmitted
Description: Selects either verbose or numeric response codes.
Set command: ATV[=]<value>
Read command: ATV? Displays the current <value> setting.
Read command
response: V: <value>
Test command: ATV=? Shows if the command is supported.
Test command
response: V: (list of supported <value>s)
Parameter:
<value>:
<value> Description
0 Display numeric result code
1 Display verbose result code. Default value
Result code (ATV1) Result code (ATV0) Description
OK 0 Acknowledges execution of a
command
CONNECT 1 A connection has been
established. The DCE is
moving from command state
to online data state