User guide

Developers guidelines | AT commands
56 June 2010
Ensemble C18: Fax class 1
Commands
AT+FCLASS Select mode
Ensemble C20: Audio control
Commands
AT*ECBP CHF button pushed (ver. 2)
Description: Puts the TA into a particular mode of operation (data, fax, voice, and so
on). This causes the TAE to process information in a manner suitable for
that type of information.
Reset + hangup on failed ATA sets mode to class 0, data mode.
Execution
command: AT+FCLASS=<n>
Read command: AT+FCLASS?
Read command
response: <n> Show list of supported services
Test command: AT+FCLASS=? Shows if the command is supported.
Test command
response: (list of supported <n>s)
Parameter:
<n>:
<n> Description
0 Data modem
Description: This command is used by the cordless handsfree (CHF) to indicate to the
phone that a button on the CHF has been pushed.
Action command: AT*ECBP[=<button>[,<time>]]
Test command: AT*ECBP=? Shows if the command is supported.
Test command
response: *ECBP: (list of supported <button>s),(list of supported <time>s)
Parameters:
<button>: