User guide

Developers guidelines | AT commands
85 June 2010
AT+GCLIP Graphical caller ID presentation
3 Voice recognition activation (enables unsolicited
+BVRA)
4 Remote volume control. (enables unsolicited +VGS)
5–31 Unused
<ME supported
features bitmap>
bit Description
0 Three-way calling (AT+CHLD supported)
1 AC and/or NR function (AT+NREC supported)
2 Voice recognition function (AT+BVRA supported)
3 In-band ring tone capability (not supported)
4 Attach a number to a voice tag (AT+BINP
supported)
5 Ability to reject call (AT+CHUP supported)
6–31 Unused
Description: Activates an unsolicited result code +GCLIP. +GCLIP is used to transmit a
graphical representation of the CLIP data when there is an incoming call.
For detail information, please see Unsolicited result code in +GCLIP.
Note: The functionality of this command has been replaced by AT*SETBC.
Note: The unsolicited result code(s) will only return one image. The bitmap
that is returned by the +GCLIP command will only contain the information/
characters that fit into the image (98x16).
Execution
command: AT+GCLIP=<display_type>
Test command: AT+GCLIP=? Shows if the command is supported
Test command
response: +GCLIP:[<list of supported display types>]
Parameter:
<display_type>
<display_type> Description
integer 1: 96x16 BW0
2…255 Reserved
bit Description