User guide

Developers guidelines | AT commands
87 June 2010
+BSIR Bluetooth setting of in-band ring tone indication
+BINP Bluetooth input indication
Note: Due to the small inconsistency between the GSM 07.07 standard and the
current Headset specification (Specification of the Bluetooth System;
Profiles, v1.1, Part K:6, Headset Profile.), the HF will also accept the “=”
symbol in place of “:” as a valid separator for this unsolicited result code.
Parameter:
<gain>:
<gain> Description
0–15 0 – Minimum gain
15 – Maximum gain
Description: Unsolicited result code issued by the phone to indicate to the HF that the
in-band ring tone setting has been locally changed. The HF may react
accordingly by changing its own alert method.
Unsolicited result
code: +BSIR: <bsir>
Parameter:
<bsir> Description
0 The phone provides no in-band ring tone
1 The phone provides an in-band ring tone
Description: Unsolicited result code issued by the phone in response to a request from
the terminal equipment to provide information of a specified type.
Unsolicited result
code: +BINP: <dataresp1>[,...,<datarespn>]
Parameter:
<datarespn> type is dependent on the <datarequest> parameter. See AT+BINP