Installation guide

INSTALLATION
2.
Install the two brackets to the chimney structure supplied with the kit by using one screw each
side.
3. Join the two top sections of the duct cover.
4.
Screw the two sections together with 8 screws (4 each side- see the top view in Fig. ] d for
joining the two sections).
Install the top duct cover assembly to the bracket, near the ceiling, with two screws (one each
side).
Fix to the top
"_ Bracket
Bracket
I
Drive a #! 0 x 2-1/4"
screw into wood
framing above
ceiling.Thisscrew
supports the loadof
the upper chimney
duct cover.One
screweachside.
Top Duct
assembly
- - -._ Diagram
_®®®®®®®®®®®®®®®®®®®®®®®®®®_
FIG. 16
15