Installation guide

6
SELECT LOCATION:
The proper location will ensure peak performance of your appliance. Choose a location where the unit will be
out of direct sunlight, away from heat sources and moisture. Units with fan cooled condensers can be built in.
Unit should be operated in a properly ventilated area with ambient temperatures above 40 degrees and below
100 degrees Fahrenheit.
Installation should be such that the cabinet can be moved for servicing if necessary.
CABINET CLEARANCE:
Ventilation is required from the bottom front section of the unit. Keep this area open and clear of any
obstructions.
The adjacent cabinets and counter top can be built around the unit as long as no top trim or counter top is
installed lower than the top of the hinge.
SIDE TRIM INSTALLATION:
Attach side trim to the inner side of the cabinet so that the trim faces outward (away from the appliance’s door)
and fasten with appropriate screws suitable for the type of cabinet material.
INSTALLATION
HOW TO INSTALL YOUR OUTDOOR REFRIGERATOR/BEER DISPENSER
24” Outdoor Refrigerator
Dimensions
24” Outdoor Beer Dispenser
Dimensions
13-3/4”
Mounting
screws not
provided
Mounting
screws not
provided
Fig. 04
Island Preparation with No Side Trim
Island Preparation with Side Trim Installation
Island Preparation with No Side Trim
Island Preparation with Side Trim Installation