user guide

9
LIGHTING INSTRUCTIONS
1
2
3
If you are using propane gas, a slight pop or flash may occur at the burner ports a few
seconds after the burner has been turned OFF. This is normal for propane gas.
Only one burner may be ignited at any one time. Once burner has been successfully lit,
another burner may be ignited.
Push in and hold the selected dial for 2
seconds before turning to HI. Hold for 5
seconds to light the selected burner.
If burner does not light in 5 seconds,
turn dial back to
OFF and wait 5 minutes
before trying again. This will allow any
accumulated gas to dissipate.
Remove the cover and any cooking utensils.
Ensure the drip pan is in place.