Install Guide

INSTALLATION

Side shelf assembly instructions (optional)

Optional attach side shelf accessory on either side

Note: side shelf model CAD1-SK can be installed with the head already on the cart.

Screw two shoulder bolts into the bottom

screws on the side of the cart. Tighten with

5/32 Allen wrench.

Slide left and right side shelf brackets over

the shoulder bolt and install top screw

attaching the side shelf brackets onto the

cart. Tighten with Phillips screwdriver.

Holding the side shelf, install two shoulder

bolts into the slot and screw into the side

shelf tray. Tighten witha 3/16 Allen wrench.

Place shelf in the up position and check for

level. If shelf is not level, adjust side shelf

set screw. Set screws can be adjusted using

a 3/32 Allen wrench. Turn the Allen wrench

clockwise to raise the shelf. Turn 1/4 turn

and review to see if the shelf is level. The set

screws in the left and right bracket should be

adjusted equally to ensure the shelf sits level.

Optional wood cutting board (model # CAD1-WCB,

70861) can be purchased as an accessory from

www.dcsappliances.com.

Shoulder bolt

screw location