Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide

80304ST10041a Rev. 7 - 2010-10-14

#SHSEC - Handset Echo Canceller

Note: This parameter is saved in NVM issuing AT&W command

AT#SHSEC? Read command reports whether the echo canceller function on audio

handset output is currently enabled or not, in the format:

#SHSEC: <mode>

AT#SHSEC =? Test command returns the supported range of values of parameter

<mode>.

3.5.7.1.70. Handset Noise Reduction - #SHSNR

#SHSNR - Handset Noise Reduction

AT# SHSNR =

<mode>

Set command enables/disables the noise reduction function on audio

handset input.

Parameter:

<mode>

0 - disables noise reduction for handset mode (default)

1 - enables noise reduction for handset mode

Note: This parameter is saved in NVM issuing AT&W command

AT# SHSNR? Read command reports whether the noise reduction function on audio

handset input is currently enabled or not, in the format:

#SHSNR: <mode>

AT# SHSNR =? Test command returns the supported range of values of parameter

<mode>.

3.5.7.1.71. Set Handset Sidetone - #SHSSD

#SHSSD - Set Handset Sidetone

AT#SHSSD=

<mode>

Set command enables/disables the sidetone on handset audio output.

Parameter:

<mode>

0 - disables the handset sidetone

1 - enables the handset sidetone (factory default)

Note: This parameter is saved in NVM issuing AT&W command

AT#SHSSD? Read command reports whether the headset sidetone is currently enabled

or not, in the format: