Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide
80304ST10041a Rev. 7 - 2010-10-14
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 307 of 318
#STGI - SIM Tookit Get Information
0 - SIM Initialization and Full File Change Notification;
1 - File Change Notification;
2 - SIM Initialization and File Change Notification;
3 - SIM Initialization;
4 - SIM Reset
if <cmdType>=16 (SET UP CALL)
#STGI: <cmdType>,<cmdDetails>,[<confirmationText>],
<calledNumber>
where:
<cmdDetails> - unsigned integer, used as an enumeration
0 - Set up call, but only if not currently busy on another call
1 - Set up call, but only if not currently busy on another call, with redial
2 - Set up call, putting all other calls (if any) on hold
3 - Set up call, putting all other calls (if any) on hold, with redial
4 - Set up call, disconnecting all other calls (if any)
5 - Set up call, disconnecting all other calls (if any), with redial
<confirmationText> - string for user confirmation stage
<calledNumber> - string containing called number
if <cmdType>=17 (SEND SS)
if <cmdType>=18 (SEND USSD)
if <cmdType>=19 (SEND SHORT MESSAGE)
if <cmdType>=20 (SEND DTMF)
if <cmdType>=32 (PLAY TONE)
#STGI: <cmdType>[,<text>]
where:
<text> - text to be displayed to user
if <cmdType>=33 (DISPLAY TEXT)
#STGI: <cmdType>,<cmdDetails>[,<text>]
where:
<cmdDetails> - unsigned Integer used as a bit field.
0..255 - used as a bit field:
bit 1: