Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide

80304ST10041a Rev. 7 - 2010-10-14

+COPS - Operator Selection

require some seconds before the output is given.

Example

AT+COPS?

+COPS: 0,0,"Test PLMN 1-1",0

at+cops=?

+COPS: (2,"","","45008",2),(1,"Test PLMN 1-1","Test1-

1","00101",0),(3,"","","45005",2),,(0-4),(0-2)

Reference 3GPP TS 27.007

3.5.4.3.5. Facility Lock/Unlock - +CLCK

+CLCK - Facility Lock/Unlock

AT+CLCK=

[,<passwd>

[,<class>]]

Execution command is used to lock or unlock a ME or a network facility.

Parameters:

<fac> - facility

"SC" - SIM (PIN request) (device asks SIM password at power-up and when

this lock command issued)

"AO"- BAOC (Barr All Outgoing Calls)

"OI" - BOIC (Barr Outgoing International Calls)

"OX" - BOIC-exHC (Barr Outgoing International Calls except to Home

Country)

"AI" - BAIC (Barr All Incoming Calls)

"IR" - BIC-Roam (Barr Incoming Calls when Roaming outside the home

country)

"AB" - All Barring services (applicable only for <mode>=0)

"AG" - All outGoing barring services (applicable only for <mode>=0)

"AC" - All inComing barring services (applicable only for <mode>=0)

"FD" - SIM fixed dialling memory feature (if PIN2 authentication has not

been done during the current session, PIN2 is required as <passwd>)

"PN" - network Personalisation

"PU" - network subset Personalisation

"PP" - service Provider Personalization (refer 3GPP TS 22.022 [33])

"PC" - Corporate Personalization (refer 3GPP TS 22.022 [33])

"PF" - lock Phone to the very First inserted SIM/UICC card (also referred in

the present document as PH-FSIM) (MT asks password when other

than the first SIM/UICC card is inserted)

<mode> - defines the operation to be done on the facility

0 - unlock facility

1 - lock facility

2 - query status