Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide

80304ST10041a Rev. 7 - 2010-10-14

3.5.4.3.16. SS Notification - +CSSN

+CSSN - SS Notification

AT+CSSN=[<n>

[,<m>]]

It refers to supplementary service related network initiated notifications.

Set command enables/disables the presentation of notification result codes

from TA to TE.

Parameters:

<n> - sets the +CSSI result code presentation status

0 - disable

1 - enable

<m> - sets the +CSSU result code presentation status

0 - disable

1 - enable

When <n>=1 and a supplementary service notification is received after a

mobile originated call setup, an unsolicited code:

+CSSI: <code1>

is sent to TE before any other MO call setup result codes, where:

<code1>:

0 - unconditional call forwarding is active

1 - some of the conditional call forwardings are active

2 - call has been forwarded

3 - call is waiting

5 - outgoing calls are barred

6 - incoming calls are barred

When <m>=1 and a supplementary service notification is received during a

mobile terminated call setup or during a call, an unsolicited result code:

+CSSU: <code2>

is sent to TE, where:

<code2>:

0 - this is a forwarded call (MT call setup)

2 - call has been put on hold (during a voice call)

3 - call has been retrieved (during a voice call).

4 - multiparty call entered (during a voice call)

5 - call on hold has been released (this is not a SS notification) (during a

voice call)

AT+CSSN? Read command reports the current value of the parameters.

AT+CSSN=? Test command reports the supported range of values for parameters <n>,

<m>.

Reference 3GPP TS 27.007