Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide
80304ST10041a Rev. 7 - 2010-10-14
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 91 of 318
3.5.4.3.17. Closed User Group Supplementary Service Control - +CCUG
+CCUG - Closed User Group Supplementary Service Control
AT+CCUG=
[<n>[,<index>
[,<info>]]]
Set command allows control of the Closed User Group supplementary
service [3GPP TS 02.85/22.085].
Parameters:
<n>
0 - disable CUG temporary mode (factory default).
1 - enable CUG temporary mode: it enables to control the CUG information
on the air interface as a default adjustment for all following outgoing
calls.
<index>
0..9 - CUG index
10 - no index (preferential CUG taken from subscriber data) (default)
<info>
0 - no information (default)
1 - suppress Outgoing Access (OA)
2 - suppress preferential CUG
3 - suppress OA and preferential CUG
AT+CCUG? Read command reports the current value of the parameters
AT+CCUG=? Test command returns the OK result code
Reference 3GPP TS 27.007
3.5.4.3.18. Preferred Operator List - +CPOL
+CPOL - Preferred Operator List
AT+CPOL=
[<index>][,<format>
[,<oper>][,<GSM_Ac
T>,
<GSM_Compact_Ac
T>,
<UTRAN_AcT]]
Execution command writes an entry in the SIM list of preferred operators.
Parameters:
<index> - integer type; the order number of operator in the SIM preferred
operator list
1..
n
<format>
0 – long format alphanumeric <oper>
1 – short format alphanumeric <oper>
2 - numeric <oper>
<oper> - string type
<GSM_AcT> - GSM access technology
0 – access technology not selected
1 – access technology selected
<GSM_Compact_AcT> - GSM compact access technology
0 – access technology not selected