Specifications

UC864-E/G/WD/WDU Product Description

80281ST10034a Rev. 4 – 2009-06-24

2 Overview

The Telit UC864-E/G/WD/WDU modules are small, lightweight, low power consumption

and RoHS compliant devices that allow digital communication services wherever a

WCDMA, HSDPA (HSDPA for UC864-E/G only), GSM, GPRS and EGPRS network is

present.

Telit UC864-E/G supports HSDPA 7.2. UC864-G is three band HSDPA7.2

(850/1900/2100 MHz) and quad band GSM (GSM 850/900, DCS 1800 and PCS 1900)

with the addition of a 12-channel GPS receiver integrated onboard. UC864-E is one

band HSDPA7.2 (2100 MHz) and quad band GSM (GSM 850/900, DCS 1800 and PCS

1900).

UC864-WD/WDU is a low cost solution for medium to high quantity projects, when high

data rate typical of HSDPA are not required, downlink speed is 384kb max. UC864WD

is dual band UMTS in 900/2100 MHz and dual band GSM in GSM 900 and DCS 1800.

UC864-WDU is dual band UMTS in 850/1900 MHz and dual band GSM in GSM 850

and PCS 1900.

UC864-E/G/WD/WDU benefits of Telit Unified Form Factor concept, a product family

pin-to-pin compatible, sharing the same SW interface.

The UC864-E/G/WD/WDU is provided with an 80-pin Molex board to board connector

and a 50 Ohm Murata RF connector for GSM/WCDMA antenna on front side. The

UC864-G is also provided with an additional 50 Ohm Murata RF connector for GPS

antenna on the rear side.

The UC864-E/G/WD/WDU module includes features like GPRS/EDGE CLASS 12,

Voice, Circuit Switched Data transfer, Fax, Phonebook and SMS support, embedded

TCP/IP stack and battery charging capabilities.

UC864-G is also provided with integrated full 12-channel high sensitivity GPS

functionality for indoor fixes and simultaneous GPS with voice & data.