Specifications

UC864-E/G/WD/WDU Product Description
80281ST10034a Rev. 4 – 2009-06-24
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 41 of 57
6 AT Commands
The Telit UC864 family module can be driven via the serial interface using the
standard AT commands
2
.
The Telit UC864 family modules are compliant with:
1. Hayes standard AT command set, in order to maintain the compatibility with
existing SW programs.
2. 3gpp TS 27.007 specific AT command and WCDMA/GPRS specific commands.
3. 3gpp TS 27.005 specific AT commands for SMS (Short Message Service) and
CBS (Cell Broadcast Service)
4. FAX Class 1 compatible commands
Moreover, the Telit UC864 family module supports also Telit proprietary AT
commands for special purposes.
For a more information about AT commands supported by UC864 family modules
please refer to document UC864 AT Commands Reference Guide, code
80304ST10041a.
2
The AT is an ATTENTION command and is used as a prefix to other parameters in a string. The AT command
combined with other parameters can be set up in the communications package or typed in manually as a
command line instruction.