Specifications

UC864-E/G/WD/WDU Product Description

80281ST10034a Rev. 4 – 2009-06-24

product after integration is intended for portable use, a new application and FCC ID is

required.

The Telit UC864-G modules are also conforming to the following US Directives:

 Use of RF Spectrum. Standards: FCC 47 Part 22;

 Use of RF Spectrum. Standards: FCC 47 Part 24;

 EMC (Electromagnetic Compatibility). Standards: FCC47 Part 15.

To meet the FCC’s RF exposure rules and regulations:

● The antenna(s) used for this transmitter must be installed to provide a

separation distance of at least 20 cm from all persons and must not be co-

located or operating in conjunction with any other antenna or transmitter;

● The antenna(s) used for this module must not exceed 3 dBi for mobile and fixed

or mobile operating configurations.

Users and installers must be provided with antenna installation instructions and

transmitter operating conditions for satisfying RF exposure compliance.

Manufacturers of mobile, fixed or portable devices incorporating this module are

advised to clarify any regulatory questions and to have their complete product tested

and approved for FCC compliance.

Interference statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. this device may not cause harmful interference, and

2. this device must accept any interference received, including interference that may

cause undesired operation.