Content 1 2 3 General Information ................................................................................................................................................. 4 1.1 Profile.............................................................................................................................................................. 4 1.2 Safety Information .................................................................................................................................
3.7 4 5 Using the Headset ......................................................................................................................................... 16 Input method ........................................................................................................................................................... 16 4.1 Icons for Input Methods ................................................................................................................................ 16 4.
6 Appendix ..................................................................................................................................................................
1 1.1 General Information Profile Please read this pamphlet carefully in order to make your phone in perfect condition. Our company may change this mobile phone without prior written notice and reserves the final right to interpret the performance of this mobile phone. Due to different software and network operators, display on your phone may be different, refer to your phone for details. 1.
In some countries, dialing or receiving calls while driving is illegal! ¾ SWITCH OFF IN AIRCRAFT Wireless devices can cause interference in aircraft. Using a mobile phone in flight is illegal and risky. Please make sure that your mobile phone is powered off in flight. ¾ SWITCH OFF BEFORE ENTERING RISKY AREAS Strictly observe the relevant laws, codes, and regulations on the use of mobile phones in risky areas.
Use only approved accessories and batteries. ¾ USE SENSIBLY Use only in a normal and proper manner. ¾ EMERGENCY CALLS Ensure the phone is switched on and in service, enter the emergency number, e.g. 112, then press the Dial key. Give your location and state your situation briefly. Do not end the call until told to do so. Note: Just like all other mobile phones, this mobile phone does not necessarily support all the features described in this manual due to network or radio transmission problems.
phone to damage electronic circuits when the mobile phone is moved to a constant temperature place. ¾ Do not throw, knock or shock the mobile phone, as that will destroy the internal circuits and high-precision components of the mobile phone. 2 2.1 Phone overview 2.
Left and right soft key The bottom line on the screen displays the functions of the Left and Right soft key. Direction key Press them to scroll the options when browsing a function list. In edit state, press direction keys to navigate. OK key Press it to confirm your selection. Delete key Press it to delete a character before cursor. Linefeed This key helps to switch to another line when the interface is in the edit interface. Shift key Press this key to switch between input methods.
2.3 Technical specifications Phone Dimensions (W×D×H): Weight: Lithium battery Rated capacity: Continuous standby duration: (Relates to network status) Continuous conversation duration: (Relates to network status) Please refer to their labels for other data related to the battery and the charger. 3 3.
Installation Hold the End key for a while to power off the mobile phone Push the back cover above the battery and remove it. Pull the left battery buckle outward and then lift the battery away. Insert the SIM card into the SIM card slot lightly with the corner cutting of the card aligning to the notch of the slot and the gold plate of the card facing download, till the SIM card cannot be further pushed in.
unauthorized people. In general, the PIN is supplied with SIM card by the network operator. If PIN check is enabled, you need to input the PIN each time when you power on your mobile phone. The SIM card will be locked if you input wrong PIN code for three times. Unlocking methods as follows: -Input the correct PUK according to the screen tips to unlock the SIM card. -Then input the new PIN and press the OK key. -Input the new PIN again and then press the OK key.
slot, and then close the latch. To remove the T-flash card, open its latch and slightly take the card out. And then close the latch. Note: 1. The mobile phone cannot automatically identify the T-flash card being inserted when the mobile phone is powered on. You must power off the mobile phone and then power it on, so that the phone can identify the T-Flash card. 2. The T-Flash card is a miniature object. Keep it out of the reach of children for fear that children swallow it! 3.
Install the battery into the mobile phone before charging the battery. Connect the adapter of the travel charger with the charging slot in the mobile phone. Ensure that the adapter is fully inserted. Insert the plug of the travel charger to an appropriate power outlet. During the charging, the battery level grids in the battery icon keep flickering till the battery is fully charged. It is normal of the battery to become hot during the charging period.
The charging process lasts a longer time for a new battery or a battery not in use for long. If the battery voltage is too low to enable the mobile phone to be powered on, charge the battery for a longer time. In this case, the battery icon does not flicker until a long time after the battery enters the charge status. During the charging, ensure the battery is placed in a room temperature environment or in an environment close to room temperature.
Input the phone lock code and press the OK key if the mobile phone prompts you to input the phone lock code. The original code is 0000 Input the PIN and press the OK key if the mobile phone prompts you to input the PIN. The PIN is provided by the network operator for new opening SIM card. Enter the standby interface. To power off the mobile phone, hold the End key for a while. 3.
Answering incoming calls Press the Dial key or the Left soft key to answer an incoming call. Press the End key to end the current conversation. To reject an incoming call, press the End key or the Right soft key. Note: If the caller can be identified, the mobile phone will present the calling number. If the calling number exists in the phonebook, the mobile phone will present both the name and the phone number of the caller.
memorandum, an icon is displayed to indicate the current input method: Numeric input:“123” English input in upper case:“ABC” English input in lower case:“abc” 4.2 To Shift Entry Methods Press shift key to switch between input methods. 4.3 Numeric Input You can input numbers with the numeric input method. Press a number key to input the corresponding number. 4.
Number key 8 Number key 9 Number key 0 * key # key X8 C9 0 G* V# English input: To input a blank, press Space. To clear wrong inputs, press the delete key. 4.5 Inserting a Symbol Press the sym key to enter the Select symbol interface and select a symbol you want. 5 5.1 Using the menu Messaging If the short message memory is full, a blinking message icon appears on the top of the screen. To normally receive short messages, you need to delete some of the existing short messages.
is activated, the phone will give off a message report alert tone. Write message Access this menu to create a text message. Inbox Received Messages are listed in this menu. Outbox The messages which are sent failed are stored in the Outbox. Drafts From the main menu select “Messages” to create text message. You can type a message, and you're also able to insert a pre-defined message from “Templates”. While writing a message, select “Options” to access all the messaging options.
Preferred storage:Select the memory as per your need. Memory status View the percentage of the memory seized by the short messages in the SIM card to the total SIM card capacity and the percentage of the memory seized by the short messages in the phone to the total phone capacity. Voice mail Edit: Edit or delete your voice mailbox number; or select OK to save the number. Call voicemail: Dial the voice mailbox number stored in the voice mailbox number list.
phone and in the SIM cards form a phonebook. Contacts After selecting a telephone number in the phonebook, select Options to perform the following operations: View: View the content of the telephone number. Call: call the current number of the SIM1 or SIM2. Add new contact: add the new number to SIM or phone. Sent message: sent message to the selected number. Edit: Edit the selected number and name. Delete: Delete the telephone number from the phonebook.
Copy all Duplicate the telephone number from the mobile phone to the SIM card or from the SIM card to the mobile phone. Owner number Edit your name car, or send it via a short message, or save it as a file. Preferred storage Select the memory as per your need. Memory status Query the memory status. Speed dial Through this function, you can set the status of single key dial function. For each of the number key 2~9, you can set a phone number.
fall into five scenarios: General, Meeting, Outdoor, Indoor and Headset. When you insert an earpiece to the mobile phone, the mobile phone automatically enters the Headset mode. There is no option for activating the Headset mode on the screen. For details on operation, refer to General. If you set Headset > Customize > Answer mode to Auto, incoming calls will be automatically answered. 5.3.1.1 Activate Select Activate to activate the selected mode. 5.3.1.
Received Calls You can view the latest received calls. Choose received calls and then select a received call to delete, save, dial, or edit (or send a short message to it). All calls You can view a list of all calls. Clear logs You can clear the latest call records. Choose clear logs and then select to delete all the numbers in the call history, or delete only the numbers in the missed calls list, the dialed calls list or the received calls list. 5.
Choose File manager to enter the root directory of the memory. The root directory will list the default folders, new folders and user files. When the mobile phone is powered on for the first time or when you have not changed the directory, the root directory contains the default folders only. You can use this function to format all the data in the memory. The system will re-create a default folder. The formatted data cannot be recovered. Therefore, think twice before using the formatting function.
Settings: Through this function, you can set storage position and format for record files. FM Radio You can use the application as a traditional FM radio with automatic tuning and saved channels. In FM radio interface, you can press left or right direction key to search channels manually, Ok key to play/pause the playing process of the current channel. You can press up or down direction key to tune volume. 5.6 Settings Date and time Set the date format, the time format, and detail time of the location.
Auto keypad lock: The function enables you to lock/unlock the keypad. Input method settings: Select preferred input method as needed. Call Settings SIM1 call settings ¾ Caller ID: You can select the ID set by the network, hide the ID, or send the ID. By default, the ID set by the network is chosen. Note: This function relates to the network. If you select Hide ID, dialing may fail. Therefore, make sure that calls can be normally dialed before you choose Hide ID.
¾ Line switching: Switch to Line 1 or Line 2. By default, Line 1 is used. ¾ Closed user group: This function requires network support. For details, consult the local network operator. Note: If you choose Line 2, dialing may fail. This depends on the implementation of the network operator. Common call settings Call time reminder: To set single or circle tone in a call to make you know the time. Auto redial: Set it to On or Off to enable or disable auto redial.
Network status Query the network status. Security Settings This function provides you with related settings about safety use SIM1 lock: To set the SIM1 lock, you need to input the PIN. You can set the SIM lock only after inputting the correct PIN. If you set SIM1 lock to On, you need to input the PIN each time you power on the mobile phone. In the case you input a wrong PIN for three consecutive times, you need to input the PIN Unblocking Key (PUK). The PUK is used to unlock and change the locked PIN.
Set UART Select SIM 1 or SIM 2 as needed. Bluetooth With Bluetooth, you can make a wireless connection to other compatible devices, such as mobile phones, computers, headsets and car kits. You can use the Bluetooth to send images, video clips, music, sound clips and notes, and transfer files from your compatible pc. Restore Factory Settings Use this function to restore factory settings. The preset password is 0000. 5.
To do list You can create new memos through this function. If you have set the alarm for the memo, alarm will sound when time is up, the content of memo will display at the same time. Alarm You can set an alarm by modifying an existing alarm or by adding a new one. For the alarm clock, the ringing date and the ringing time can be set. World clock Access this menu to view time of main cities in various time zones. Calculator The calculator can add, subtract, multiply and divide.
6 Appendix Appendix 1:Troubleshooting If you find exceptions when operating the mobile phone, restore the factory settings and then refer to the following table to solve the problem. If the problem persists, contact the distributor or service provider. Fault SIM card error Cause The SIM card is damaged. The SIM card is not in position. The metal face of the SIM card is polluted.
Poor received signal quality Signals are obstructed. For instance, radio waves cannot be effectively transmitted nearby a high building or in a basement.
The mobile phone cannot be powered on The battery energy is exhausted.
The mobile phone is not in a service area of the GSM network The battery cannot be charged The signal is weak The charging voltage does not match the voltage range indicated on the charger An improper charger is used Poor contact Move to the network operator's service area Move to a place where the signal quality is high Ensure the charging voltage matches the voltage range indicated on the charger Use the charger specially designed for the mobile phone Ensure the charger plug is in good contact with
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Specific Absorption Rate (SAR) information: This mobile phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.
-38-