User manual

30
12.4 Key in the converter IP and socket port number
Enter the converter’s IP address (e.g. 192.168.0.115) at the “Host
address:” field, and the Socket port number set for the Serial Port 1
at the “Port number:” field (e.g 100). (The Socket type of the Serial
Port 1 should be “TCP Server”.)
Press “OK” button.
12.5 After completing the parameters setting and then the hyper terminal
window will be pop up. If the Hyper Terminal connects with the
converter successfully, the time clock at the “left lower” corner in
window “Connected hh:mm:ss” will start counting.