Operation Manual

1 Specific information
1.1 Recommendations
Note
Only qualified persons are authorised to assemble, install and
maintain the installation.
1.2
Ecodesign Directive
This product conforms to the requirements of European Directive
2009/125/EC on the ecodesign of energy-related products.
1.3
Technical data - Hot water storage tank
Tab.1 Technical parameters for BSL hot water storage tanks
BSL 150 BSL 200 BSL 300 BSL 400
Storage volume V l 150 225 300 400
Standing loss S W 58 75 92 108
Tab.2 Technical parameters for BESL hot water storage tanks
BESL 200 BESL 300 BESL 400
Storage volume V l 225 300 400
Standing loss S W 75 92 108
1.4 Circulation pump
Note
The benchmark for the most efficient circulators is EEI ≤ 0.20.
1.5 Disposal and Recycling
Note
Removal and disposal of the domestic hot water tank must be car
ried out by a qualified installer in accordance with local and nation
al regulations.
1. Cut the electricity to the domestic hot water tank.
2. Disconnect the cables on the electrical components.
3. Close the domestic water inlet valve.
4. Drain the installation.
5. Dismantle all water connections fitted to the domestic hot water tank
outlet.
6. Scrap and recycle the domestic hot water tank in accordance with
local and national regulations.
1.6
Product fiche - Solar devices
Tab.3 Product fiche for BSL solar devices
BSL 150 BSL 200 BSL 300 BSL 400
Solar hot water storage tank - Energy efficiency class
C
C
C
C
Solar hot water storage tank - Standing loss W 58 75 92 108
1 Specific information
300028413 - ErP01 - 25082015 3