99641611_A_MULTI.
99641611_A_MULTI.qxp 20/03/2007 17:36 Page 58 FR 02 Dear Customer, CS 16 You have just acquired a DE DIETRICH oven and we would like to thank you. DA 30 DE 44 EN 58 ES 72 IT 86 NL 100 PT 114 Our research teams have created this new generation of appliances for you. Their quality, appearance, functions and technological advances make them exceptional products, showcases of our unique know-how.
99641611_A_MULTI.
99641611_A_MULTI.qxp EN 20/03/2007 17:36 Page 60 1 / DESCRIPTION OF YOUR APPLIANCE • INTRODUCTION TO YOUR OVEN A B C D E A Programmer D Light B Temperature selector switch E Wire shelf supports C Function selector switch •Accessories Your appliance has two safety grids with handles, one with handles for a 45 mm dish, a Lissium pastry dish and a 45 mm dish.
99641611_A_MULTI.
99641611_A_MULTI.qxp EN 20/03/2007 17:36 Page 62 2 / USING YOUR APPLIANCE • USING THE PROGRAMMER •How to set the time - When plugged in The display flashes 12:00 (fig.1). fig.1 Set the time by pressing the + or - buttons (holding your finger on the button allows you to scroll through the numbers rapidly) (fig.2). Example: 12:30 Press the “ ” button to confirm. The display stops flashing. fig.2 - To set the time on the clock The function selector switch must be in the 0 position (fig.1). fig.
99641611_A_MULTI.qxp 20/03/2007 17:36 Page 63 EN 2 / USING YOUR APPLIANCE •Immediate cooking — The programmer should display only the time. It should not be flashing (fig.1). fig.1 Turn the function selector to the position of your choice. Example: position (fig.2). Your oven recommends the optimal temperature for the chosen cooking mode. It is, however, possible to adjust the temperature by pushing the selection lever towards + or - (fig.3). fig.
99641611_A_MULTI.qxp EN 20/03/2007 17:36 Page 64 2 / USING YOUR APPLIANCE • PROGRAMMED COOKING - Cooking with immediate programmed duration start and - Select the desired cooking mode and adjust the temperature (fig.1). fig.1 - Press the “ ” button until the cooking time indicator starts to flash . The display flashes 0:00 to indicate that you can now adjust the setting (fig.2). - Press the + or - buttons to set the desired time. Example: 30 mins cooking time (fig.3).
9641611_A_MULTI.qxp 20/03/2007 17:36 Page 65 EN 2 / USING YOUR APPLIANCE • PROGRAMMED COOKING - Cooking with delayed start and chosen cooking end time Proceed as with programmed cooking. - After setting the cooking time, press the “ ” button until the end of cooking indicator flashes “ ”. The display flashes to indicate that you can now adjust the setting (fig.1). fig.1 - Press the + or - button to set the desired cooking end time. Example: end of cooking at 13:00 (fig.2).
99641611_A_MULTI.qxp EN 20/03/2007 17:36 Page 66 2 / USING YOUR APPLIANCE • USING THE TIMER FUNCTION - Your oven’s programmer can be used as an independent timer that allows you to count down a time without operating the oven. In this case, the timer display has priority over the clock display. - Press the “ ” button (fig.1) until the timer symbol begins flashing. -> 0.00 and a small hourglass both flash. fig.1 - Adjust the chosen time by pressing the buttons + or - (fig.2).
99641611_A_MULTI.qxp 20/03/2007 17:36 Page 67 EN 3 / OVEN COOKING MODES * CIRCULATING HEAT (recommended temperature 180°C min 35°C max 235°C) •Cooking is by a heating element at the bottom of the oven and the oven fan. •Rapid temperature increase: Some dishes can be placed in the oven while it is still cold. •Recommended to retain moisture in white meat, fish, vegetables. For cooking multiple items on up to 3 levels.
99641611_A_MULTI.qxp EN 20/03/2007 17:36 Page 68 3 / OVEN COOKING MODES GRILL HIGH + ROTISSERIE (recommended position 4 - min 1 - max 4) •Cooking done by the upper element. •The grill on high setting covers the entire grid surface. •Recommended for grilling chops, sausages, toast or prawns, placed on the grid. BREAD (recommended temperature 205°C min 35°C max 275°C) •Cooking sequence recommended for baking bread. •After preheating, place the dough on the pastry dish - 2nd shelf support.
99641611_A_MULTI.qxp 20/03/2007 17:36 Page 69 EN 4 / CARING FOR AND CLEANING YOUR OVEN • PERFORM A PYROLYSIS •Immediate pyrolysis - Remove the grids and trays from the oven and clean any major spill residue. - Check that the programmer is displaying the time of day and that it is not flashing (fig.1). You can choose 3 durations of pyrolysis: fig.1 pyrolysis lasting 1 hour 30 minutes. pyrolysis lasting 1 hour 45 minutes. pyrolysis lasting 2 hours.
99641611_A_MULTI.qxp EN 20/03/2007 17:36 Page 70 4 / CARING FOR AND CLEANING YOUR OVEN • PERFORM A PYROLYSIS •Delayed pyrolysis - Follow the instructions described in the section “Immediate pyrolysis”, then: - Turn the function selector to the desired pyrolysis setting. - Press the button. The end of cooking symbol flashes to indicate that it is now possible to set it (fig.1). fig.1 - Press the + or - button to set the desired end time (fig.2). Example: end of cooking at 18:00.
99641611_A_MULTI.qxp 20/03/2007 17:36 Page 71 EN 5 / AFTER-SALES SERVICE •SERVICE CALLS Any repairs that are made to your appliance must be handled by a qualified professional authorised to work on the brand. When you call, mention your appliance’s complete reference (model, type, serial number). This information appears on the manufacturer’s nameplate (fig.1). BRANDT APPLIANCES SAS 7 rue Henri Becquerel 92500 RUEIL MALMAISON MADE IN FRANCE 230V ~ 50 Hz fig.
99641611_A_MULTI.