User guide

69
4 / CARING FOR AND CLEANING YOUR OVEN
EN
fig.1
•Immediate pyrolysis
--
Remove the grids and trays from the oven
and clean any major spill residue.
--
Check that the programmer is displaying the
time of day and that it is not flashing (fig.1).
You can choose 3 durations of pyrolysis:
pyrolysis lasting 1 hour 30 minutes.
pyrolysis lasting 1 hour 45 minutes.
pyrolysis lasting 2 hours.
--
Turn the function selector to the desired
pyrolysis setting.
Example: 1 hr 45 mins (fig.2).
When pyrolysis starts, the symbol
displays in the programmer as well as the
duration of the pyrolysis cycle (fig.3).
The symbol displays in the programmer to
indicate that the door is locked.
When pyrolysis finishes, 0:00 starts flashing as
well as the symbol (fig.4).
To return to the time of day, set the function
selector to stop (fig.5).
--
When the oven is cool, use a damp cloth to
remove the white ashes.
The oven is clean and once again ready for the
cooking cycle of your choice.
Notes: The cleaning temperature cannot be
adjusted. During the pyrolysis cycle, the oven
lighting is off. If your oven is not clean after a
pyrolysis cycle, you waited too long before
launching a cleaning cycle. Repeat the cycle.
PERFORM A PYROLYSIS
••
fig.2
fig.3
fig.4
fig.5
99641611_A_MULTI.qxp 20/03/2007 17:36 Page 69