EN GUIDE TO INSTALLATION Oven
EN TABLE OF CONTENTS 1 / NOTICES TO THE USER • Safety Instructions _________________________________________ • Caring for the Environment __________________________________ 04 05 2 /INSTALLING YOUR APPLIANCE • Choice of location __________________________________________ • Fitting ___________________________________________________ • Electric connection _________________________________________ 06 06 07 3/ DESCRIPTION OF YOUR APPLIANCE • Accessories _______________________________________________ 09
EN 1 / INFORMATION FOR THE USER — When placing dishes inside or removing them from the oven, do not place your hands close to the upper heating elements, use heat-protective kitchen gloves. Warning Keep this user guide with your appliance. If the appliance is ever sold or transferred to another person, ensure that the new owner receives the user guide. Please become familiar with these recommendations before installing and using your oven. They were written for your safety and the safety of others.
EN 1 / INFORMATION FOR THE USER — Never use steam or high-pressure devices to clean the oven (electrical safety requirement). -All types of cooking are done with the door closed. — (According to model) For your safety, your oven is equipped with an AUTOMATIC STOP, if you forget to turn off your oven by mistake. After 23 hours and 30 minutes of continuous use, the AS (Automatic Stop) feature will be activated and your oven will turn itself off.
EN 2 / INSTALLING YOUR APPLIANCE 560 560 550 560 457 450 450 592 54 9 22 70 560 fig.1 • CHOICE OF LOCATION • BUILD-IN The above diagrams determine the dimensions of a cabinet that will be able to hold your oven. The oven can be installed under a work top or in a column of cabinetry (open* or closed) having the appropriate dimensions for built-in installation (see adjacent diagram). To do this : 1) Drill a hole in the cabinet panel to avoid splitting the wood.
EN 2 / INSTALLING YOUR APPLIANCE Single-phase 20A Counter 220-240V~ 50Hz 220-240 V Single-phase line~ 16A fuse or differential circuit breaker Electrical outlet 2 prong receptacle + earth CEI Standard 60083 Power supply cable length 1.50 m approx. • ELECTRIC CONNECTION Warning The safety wire (green-yellow) is The appliance must be fitted correctly to guarantee electrical safety.
EN 2 / INSTALLING YOUR APPLIANCE Warning We cannot be held responsible for any accident resulting from inexistent, defective or incorrect earthing. If the electrical installation in your residence requires any changes in order to hook up your appliance, call upon a professional electrician. If the oven malfunctions in any way, unplug the appliance or remove the fuse corresponding to the sector where the oven is hooked up. • ACCESSORIES • Safety grid (fig.
EN 3 / DESCRIPTION OF YOUR APPLIANCE • ACCESSORIES • Rotisserie (fig.3) Slide one of the forks onto the spit; skewer the piece of meat to be roasted; slide on the second fork; centre and tighten by screwing the two forks. Place the spit in its cradle: place the cradle on the sloped enamelled dish, slide the cradle in at shelf support 2, push it lightly to engage the end of the spit into the guide slot at the back of the oven. The cradle should be placed in the sloped enamelled dish.
4 / CARING FOR AND CLEANING YOUR APPLIANCE • CLEANING THE OUTER SURFACES To clean both the electronic programmer window and the oven door, use a window washing product applied to a soft cloth. Do not use abrasive creams or scouring sponges. To preserve your appliance, we recommend that you use Clearit cleaning products. Professional expertise working for you at home Clearit offers you professional products and solutions designed for the daily care of your household appliances and kitchens.
4 / CARING FOR AND CLEANING YOUR APPLIANCE - Remove the frame and the glass (fig.4). - Remove all the door’s interior windows by rotating them. This assembly comprises 2 glass windows, the 1st of which has 2 rubber stops on the 2 front corners.(fig. 5). - Clean the glass using a soft sponge and washing-up liquid. Do not soak the window in water. Do not use abrasive creams or scouring sponges. Rinse with clean water and dry off with a lint-free wiper. fig.
EN 4 / CARING FOR AND CLEANING YOUR APPLIANCE Place the glass frame assembly back in the door (fig. 7). - Take care to correctly slot the frame under the spigot next to the hinge (fig.8). - Attach the frame by tightening it with the door. Do not press on the frame alone. (fig.9). fig.7 Your appliance can now be used again. fig.
4 / CARING FOR AND CLEANING YOUR APPLIANCE EN • WHAT IS PYROLYSIS ? Warning Remove any cookware, grids and trays from the oven and clean any major spill residue before carrying out the pyrolysis. Tip Your oven is equipped with enamelled wire shelf supports : these need to be removed before running the pyrolysis cycle. - Pyrolysis is a cycle during which the oven cavity is heated to a very high temperature in order to eliminate soiling from splattering and spills.
5 / TROUBLESHOOTING EN If you have a doubt about the correct functioning of your oven, this does not necessarily mean that there is a malfunction. In any event, check the following items : YOU OBSERVE THAT… POSSIBLE CAUSES WHAT SHOULD YOU DO? The oven is not heating. - The oven is not connected to the power supply. - Your fuse is out of order. - The selected temperature is too low. ➡ Plug in your oven. ➡ Replace the fuse in your electrical set-up and check its capacity (16A).
EN 6 / AFTER-SALES SERVICE • SERVICE CALLS Any repairs that are made to your appliance must be handled by a qualified professional authorised to work on the brand. When you call, mention your appliance’s complete reference (model, type, serial number). This information appears on the manufacturer’s nameplate (Fig.1). BRANDT APPLIANCES SAS 7 rue Henri Becquerel 92500 RUEIL MALMAISON MADE IN FRANCE 230V ~ 50 Hz fig.
