User manual

8
AUT O
FRESH
AUT O
FREEZE
L
O
I
J
K
P
M
N
H
Panel de mandos del congelador
H - Lámpara chivato ENCENDIDO/APAGADO
I - Botón ENCENDIDO/APAGADO del
compartimiento congelador
J - Botón para la regulación de la temperatura
(más caliente)
K - Indicador de la temperatura del congelador
L - Botón para la regulación de la temperatura
(más fría)
M - Lámpara chivato Auto freeze
N - Botón de la función Auto freeze
O - Lámpara chivato de alarma
P - Botón de desactivación de la alarma
H. Lámpara chivato
ENCENDIDO/APAGADO
I. Botón ENCENDIDO/APAGADO
ENCENDIDO: Apretar el botón (B). La lámpara
chivato (A) se enciende.
APAGADO: Mantener apretado el botón (B)
hasta que se apagan la lámpara
chivato (A) y el indicador de
temperatura.
J - L. Botones para la regulación de
la temperatura
Es posible programar la temperatura entre -15°C y -
24°C.
Apretando el botón (J o L), en el indicador (K)
parpadea la temperatura programada. Es posible
modificar la temperatura programada sólo cuando el
indicador parpadea. Para programar una temperatura
más caliente apretar el botón (J), para programar una
temperatura más fría apretar el botón (L). El indicador
sigue mostrando, por unos segundos, la temperatura
recién seleccionada y luego indica de nuevo la
temperatura corriente dentro del compartimiento.
La temperatura programada es alcanzada dentro de
las 24 h.
Atención!
Durante el periodo de estabilización, a la primera
puesta en marcha, la temperatura mostrada puede no
corresponderse con la temperatura programada.
Durante este periodo es posible que la temperatura
mostrada sea más baja que la temperatura
programada.
D. Indicador de temperatura
Durante el funcionamiento normal indica la temperatura
media dentro del compartimiento frigorífico.
Atención!
Es normal tener una diferencia entre la temperatura
mostrada y la programada. En particular cuando:
- recientemente se ha modificado la temperatura
programada.
- la puerta ha quedado abierta por mucho tiempo.
- se han puesto en el frigorífico alimentos calientes.
De todas maneras son normales diferencias de hasta
5°C dentro del compartimiento.
M. Lámpara chivato Auto freeze
N. Botón función Auto freeze
Para congelar alimentos frescos se debe activar la
función Auto freeze. Apretar el botón (N). Se enciende
la lámpara chivato (M).
Si se desea interrumpir la función de la congelación
rápida, apretar de nuevo el botón (N), de lo contrario
la función se apaga automáticamente. Se apaga la
lámpara chivato (M).
Atención!
Cuándo se debe utilizar la función Auto freeze:
unas 6
horas antes
unas 24
horas antes
no sirve
no sirve
Introducción de pequeñas cantidades de
alimentos frescos (aproximadamente 5 kg)
Introducción de la cantidad máxima de
alimentos frescos (ver la placa de datos)
Introducción de alimentos congelados
Introducción de pequeñas cantidades de
alimentos frescos diarios hasta 2 kg
33
Storage of frozen food
When first starting-up or after a period out of use,
before putting the products in the compartment let
the appliance run for at least two hours on the fast
frost setting, then push again the Super-frost button.
Important
In the event of accidental defrosting, for example
due to a power failure, if the power has been off
for longer that the value shown in the technical
characteristics chart under “rising time”, the
defrosted food must be consumed quickly or
cooked immediately and then refrozen (after
cooling).
Thawing
Deep-frozen or frozen food, prior to being used, can
be thawed in the refrigerator compartment or at
room temperature, depending on the time available
for this operation.
Small pieces may even be cooked still frozen, directly
from the freezer: in this case, cooking will take longer.
Ice-cube production
This appliance is equipped with one or more trays
for the production of ice-cubes. Fill these trays with
water, then put them in the freezer compartment.
Do not use metallic instruments to remove the
trays from the freezer.
O. Alarm reset light
P. Alarm reset button
In the event of an abnormal temperature rise inside
the freezer (e.g. power cut) warning light (O) will
start to flash and a buzzer will sound.
After the temperature has returned to normal, the
warning light (O) will continue to flash, although the
buzzer has stopped.
When the alarm button (P) is pressed, the warmest
temperature reached in the compartment flashes on
the indicator (K).
If the power has been off for a long time, frozen food
should be consumed as quickly as possible, or
cooked and then re-frozen.
Freezing fresh food
To freeze fresh food, press the Auto freeze button
(N) at least 24 hours before.
Place the food to be frozen in the upper
compartment. The maximum quantity of food which
can be frozen in 24 hrs. is shown on the rating plate.
Warning!
When use the “Auto freeze” function:
about 6 hrs
before
about 24 hrs
before
not needed
not needed
Introducing small quantities of fresh food
(about 5 kg)
Introducing the maximum quantity of food
(see rating plate)
Introducing frozen food
Introducing small quantities of fresh food
daily 2 kg maximum
Operation
Insert the plug in the power socket. Press the button
ON/OFF (I). The freezer is switched on.
The freezer is pre-set to run at -18°C. this
temperature will be reached in a few hours.
As soon as the appliance is switched on the
temperature indicator (K) shows the current
temperature inside the freezer, the alarm reset light
(O) flashes and a buzzer sounds. Press the alarm
reset button (P). The buzzer stops and the alarm
light (O) continues to flash until the setting
temperature is reached.