User manual

On the opposite side:
1. Tighten the lower pin.
2. Install the spacer.
3. Install the door.
4. Tighten the upper pin.
Ventilation requirements
The airflow behind the appliance must be
sufficient.
min.
200 cm
2
min.
200 cm
2
Installing the appliance
Caution! Make sure that the mains
cable can move freely.
Do the following steps:
1. Drill the unit using a Ø 2.5 mm drill (10
mm max. penetration).
Fix the square fitting to the appliance.
13mm
2,5
2. Install the appliance in the niche.
Push the appliance in the direction of the
arrows (1) until the upper gap cover
stops against the kitchen furniture. Make
sure that the distance between the ap-
39