Induction Hob DTi1049
Dear Customer, Thank you for buying a DE DIETRICH hob. Our research teams have designed a new generation of kitchen appliances. As a result of our unique expertise, we have produced a range of goods whose quality, design and technical advance are unsurpassed. You will find that the clean lines and modern look of your De Dietrich hob blends in perfectly with your kitchen décor. It is easy to use and performs to a high standard.
Contents 1/ Description of your appliance 2/ Overview / working principle 3/ Quick start guide 4/ Product / Safety features explained 7/ Cleaning and maintaining your appliance 8/ Installation guide 11/ Help Guide EN
Description EN DTi1049X Total dimensions (L x l)X DTi1049 : 93cm x 51cm Cutout Recess (L’ x l’) DTI1049X : 90cm X 49cm Power : DTI1053X :9200W DTI1053XE : 7200W As shown in this logo, the materials used to package this appliance are not recyclable. Please dispose of them by depositing them in municipal containers provided for this purpose and play a role in protecting the environment.
Working Principle EN A Induction coils B Glass insulating hob top C Ferrous pan base The induction principle The principle of induction is based on a magnetic effect. When you place your cookware on a cooking zone and you turn it on, the electronic circuits in your cooking hob produce “induced” currents in the bottom of the cookware which instantly raise its temperature. This heat is then transmitted to the food.
Quick Start Guide EN Controls A Front Continuum Zone H Boil Function B Rear Continuum Zone I Power Tracker C Entire Continuum Zone J Pre-set Power Levels D Power settings display K Boost Function E Timer Settings Display L Timer + and - controls F Power + and - Controls M Elapsed Time Function G On / Off Controls for Zones N Control Lock Function Quick Start Guide Prior to using you appliance you need to ensure the appliance has been installed in accordance with the installation
Additional functions and safety Features EN Protection against overflows. In case of overflow, or of a metallic object or wet cloth placed on the control areas, the hob turns itself off, the displays light up and a beep sounds. Clean the hob or remove the object, then begin cooking again. Temperature limiter. Each cooking zone is equipped with a safety sensor that constantly monitors the temperature of the bottom of the cookware.
Additional Functions and Safety Features EN Child Lock: for added peace of mind, the child lock can be manually activated to prevent accidental start-up. To activate the lock pres the “I” key and hold until a beep is sounded and an indicator appears. To de-activate hold the “I” key until the indicator goes out and a beep sounds. Control Lock: can be activated to lock the control panel during the cooking process. This will lock the controls set on the cooking zones but will allow the stop key to function.
Additional Functions and Safety Features Pre Heat / Heat up EN Pre-heat / Heat upThis Function will preheat the contents of the pan to boiling temperature before reducing to your selected power. To select the function turn on the required zone then press the “-“on the power selection keys, “HU” is shown on the display, Select the power level to be maintained after the initial heat up ( this must be level 7 or above ).
Cleaning and Maintaining your Appliance EN Preserve your appliance The vitroceramic glass surface is highly resistant, but not unbreakable. Here are some recommendations for increasing its lifetime: - Avoid banging or clattering the cookware. - Avoid putting heating covers on the hob. A suction effect may damage the vitroceramic surface. - Do not use cookware with bottoms that are rough or dented. - Do not use your cooking hob as a work surface.
Installation Guide EN Installation Your appliance should be positioned so that the mains switch is accessible. The distance between the edge of your appliance and the side and rear walls (or partitions) must be at least four centimetres (area A). Your appliance can be easily integrated above a cabinet, an oven or a build-in household appliance. Simply verify that the air intakes and outlets are free of obstruction, poor ventilation can affect both the performance of your appliance and reduce its lifespan.
Installation Guide EN Installing above an oven When installing your appliance above an oven, it may be necessary to remove the carcass support rail from the housing in order to ensure a 4mm air gap is maintained. Most modern ovens including all De Dietrich models will not require any further insulation between the oven and hob. It is not recommended to use the Pyro-clean function of an oven while using the hob.
Installation Guide EN Electrical connection Hook-up of 220-240V ~32 amp Hook-up of 220-240V ~16 amp •Hook-up of 2x230V 2L+2N ~ - 16A •Hook-up of 400V 2N ~ - 16A •Hook-up of 400V 3~ - 16A 10
Help Guide EN Problems on installation Posssible Causes What should you do? A special code / display ap Working normally pears across the ccontrol panel Nothing this code will turn off after 30 seconds or if the zone is turned on Your installation blows a fuse Incorrect electrical connection / trip Only 1 side of the appliance works Incorrect electrical connection Check electrical supply connection The hob produces an odour during the first cooking ses sions Nothing.
Help Guide EN Problems while in use You observe that. Possible causes What should you do The hob has stopped working The hob has detected an and “” is displayed also an aud overflow or object covering able beep is heard the controls. Ensure the controls are clean and dry and remove any ob jects that cover them A series of small dashes appears The electronic circuits have across the display or “F7” over heated Check the ventillation for the appliance is in line with this guide.
