User Manual

50
11/ PROGRAMMING
EN
• End of the programme
The light flashes 15 minutes before the end of
the programme and then lights permanents
once the programme has finished.
• Setting the audible signal
The setting enables you to activate or de-acti-
vate the beep at the end of the programme.
— Access the setting by holding down “Set” jun-
til you hear a double audible signal (long beep).
Select your preference by pressing the
“Delayed Start” button
:
- Beep activated : an audible signal is heard
and the “End” light flashes.
- Beep de-activated : no audible signal and
the “End” light is unlit.
The setting is confirmed automatically after
approximately 10 seconds.
EE
• Immediate programme start
Press “
OOnn
/Off” , to switch on your
appliance and select your programme by pres-
sing one button or the other or the
Automatic programme by pressing the ICS
button.
— When a programme is selected, the associa-
ted light illuminates.
Press “Start/C” , the “In progress”
light illuminates. Close the door and the pro-
gramme starts.
A short audible signal (beep) confirm the but-
ton’s selection, except for the “On/Off” but-
ton.
• Delayed programme start
After selecting your programme, press the
“Delayed Start”
button once twice or three
times depending on whether you wish to delay
the programme start by 3, 6 or 9 hours; the
appropriate light illuminates.
Confirm by pressing “Start/C”.
• Cancelling a programme
Hold down the “Start/
CC
” button for a few
seconds.
FF
EE
FF
AA
Advice :
Consult the Programmes table on the preceding pages to determine the programme you
need for the type of items, the quantity and the amount of food residue.
Fig. 02
CC
AA DDBB EE FF