User manual

4. Fix the covers on the screws.
Do a final check to make sure that:
• All screws are tightened.
• The sealing strip is attached tightly to the
cabinet.
• The door opens and closes correctly.
Assembly instructions for the
compensator lower part of the door
1. With the door open, loosen the two
screws situated in the lower part without
unscrewing them completely.
2. Position the steel compensator as indi-
cated in the figure and insert the upper
part under the head of the screws.
3. Align the compensator with the steel
door panel and tighten the screws.
4. Insert the steel carter inside the compen-
sator as indicated in the figure.
ENVIRONMENTAL CONCERNS
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
35