Operation Manual

4
GTU C 330 16/09/2015 - 300017846-02
1. Safety instructions
1.2 Recommendations
• Check regularly that the installation contains water
and is pressurised.
• Keep the appliance accessible at all times.
• Avoid draining the installation.
• Use only original spare parts.
• Never remove or cover labels and rating plates
affixed to the appliance.
• The appliance should be on Summer or Antrifreeze
mode rather than switched off to guarantee the
following functions:
- Anti blocking of pumps
- Antifreeze protection
- Protection against corrosion on domestic hot water
tanks fitted with a titanium anode
1.3 Liabilities
1.3.1 Manufacturer's liability
Our products are manufactured in compliance with the
requirements of the various applicable European
Directives. They are therefore delivered with CE marking
and all relevant documentation. In the interest of
customers, we are continuously endeavouring to make
improvements in product quality. All the specifications
stated in this document are therefore subject to change
without notice.
Our liability as the manufacturer may not be invoked in
the following cases:
- Failure to abide by the instructions on installing the
appliance
- Failure to abide by the instructions on using the
appliance
- Faulty or insufficient maintenance of the appliance
1.3.2 Installer's liability
The installer is responsible for the installation and
commissioning of the appliance. The installer is required
to observe the following instructions:
- Read and follow the instructions given in the manuals
provided with the appliance
- Install the appliance in acordance with the legislation
and standards currently in force
- Perform the initial start up and carry out any checks
necessary
- Explain the installation to the user
- If a maintenance is necessary, warn the user of the
obligation to check the appliance and maintain it in
good working order
- Give all the instruction manuals to the user