Operation Manual

66
EN
3. Press Adjust date if you also want to set an end date for the manually selected temperature, and
select this time using push-turn button C.
4. PressbuttonCtoreturntothemainmenuorwaitvesecondsuntilthethermostatautomatically
returns to the main menu.
Press the Next program button to cancel the manual temperature change.
6.3 Fireplace mode
Once the temperature has reached the desired level in the room where the thermostat has been positioned,
thecentralheatingswitchesoff.Thismaybeinconvenientif,forexample,youhaveanopenreorifalotof
people are present in that room. Other rooms in the house are also no longer heated in this situation.
YoucanswitchonthereplacemodeviatheProgram button so that the other rooms are still heated.
This switches off the built-in room sensor in the thermostat. The temperature of the central heating water
at that point is then maintained.
If it becomes too cold or too hot in the other rooms, you can increase or decrease the room temperature
there using push-turn button C on the thermostat. This increases or decreases the central heating water
temperature.Youcantthermostatvalvestotheradiatorsinordertoindividuallycontrolthetemperaturesin
these rooms.
i
 Thereplacemodeshouldonlybeactivatedifthethermostatusestheroomtemperaturetocontrol
the temperature.