Operation Manual

Problem It takes too long for the tap water to get up to temperature.

Solution - Boiler: the DHW standby function may be switched off.

In that case the symbol T is shown in the display.

Control the DHW standby with the DHW standby setting (see the

installation and service manual).

- Boiler: the boiler may be heated up too late.

Set the tap water temperature using the DHW

(see the installation and service manual).

Problem Theboilersuppliesnohotwaterorhotwateronlybriey.

Solution

The DHW standby function T may be switched off.

Switch the DHW standby function to Continuous (see paragraph 6.1).