Operation Manual

7638216-02 - 1906201516 KALIKO SPLIT
3.2.2 Heating time of the thermodynamic water heater
according to air temperature
Fig.2 Heating time TWH Split FS 200 E
■ Scenario for complete heating cycles on the thermodynamic water
heater for a cold water temperature of 10°C
NIE-A-009
Y
-15 -5
0
1
2
3
4
5
6
7
8
9
10
11
12
13
15 25 35
5
B
A
Y
-15
0
1
2
3
4
5
6
7
8
9
10
11
12
13
5152535-5
B
A
X
X
A Heating time for a set point of 40 °C
B Heating time for a set point of 55 °C
X Air temperature (°C)
Y Heating time (hours)
Fig.3 Heating time TWH Split FS 270 E
NIE-A-009
Y
-15 -5
0
1
2
3
4
5
6
7
8
9
10
11
12
13
15 25 35
5
B
A
Y
-15
0
1
2
3
4
5
6
7
8
9
10
11
12
13
5152535
-5
B
A
X
X
3.2.3 Operation and limits of the thermodynamic water heater
Fig.4 Maximum temperature in
thermodynamic mode
The graph opposite shows the maximum temperature at which the
outdoor unit can heat up the domestic hot water tank according to air
temperature.
NIE-A-010
40°
35°
-15 -10
-7 23
24
237
X
55°
60°
62°
65°
Y
X Air temperature (°C)
Y Domestic hot water temperature (°C).
Note
For a set point in excess of the limits of the thermodynamic
mode, the surplus will be handled by the immersion heater in the
domestic hot water tank.
In order not to impair the life span and maintain the reliability
of the components, the outdoor unit has a limit on its
operating
temperature (air temperature -15°C/+42°C)
and domestic hot water production (see fig.4).
3 Technical specifications