Multi-program pyro-clean oven Reference: UMP 50* - UMP 51* User's guide
Dear Madam, Dear Sir, By choosing this oven you have expressed your trust in De Dietrich, for which we thank you. To take full advantage right from the start of the many features of your new appliance, we recommend that you read the advice given in this booklet through carefully. De Dietrich is continually developing new technologies in order to offer you the best possible ovens. The present oven includes the latest innovations.
W H AT THE INDICATOR PANEL LOOKS LIKE Programmer Program selector 1.
HOW TO USE YOUR OVEN 1. How to set the clock a) When the oven is installed The time display flashes. Set the time using + or -(holding the touch control down makes the numbers move on more quickly). Example: 12:30. Press the START/STO P touch control to confirm your setting. NOTE: If the time is not confirmed using the START/STO P control within a few seconds, it is automatically memorized.
HOW TO USE YOUR OVEN 2. How to cook immediately Select the cooking mode Select the program of your choice with the ,touch control: Example: position " ". You can scroll through the cooking programs by keeping your finger on the touch control The proposed temperature is displayed: example: 220 C. Push the START/STOP touch control to start cooking Your oven proposes the most frequently used temperature. You may nevertheless adjust this temperature yourself. 1 - Press the C touch control.
HOW TO USE YOUR OVEN 4. How to personalize the cooking temperature When you select your cooking mode, or during cooking, you can modify the temperature Press the C touch control for about 2 seconds until the temperature figures start flashing. Set the temperature you want by pressing the Confirm your selection by pressing the C + or -touch control. touch control. The next time you use your oven, the temperature you have just registered will memorized.
HOW TO USE YOUR OVEN 6. How to program your oven to start when you want (by selecting the end of the cooking time) - Carry out the same procedure as for programmed cooking. After setting the cooking time, - Press the "end of cooking" , touch control; the time for the end of cooking is indicated and flashes, as does the symbol to indicate that it may be adjusted. Example: It is 12.30. You have programmed a cooking time of 30 min. The end of cooking time indicated is 1 pm (13.00).
DESCRIPTION OF THE OVEN’S PROGRAMS PROGRAMS 40 / temperature: min./pre-selected/max. 180 /250 FAN HEATING 40 / temperature: min./pre-selected/max. 200 /250 COMBINATION MODE 40 / temperature: min./pre-selected/max. 195 /250 TURBO GRIL 40 / temperature: min./pre-selected/max. 220 /275 CONVENTIONAL Recommended positions Parts of the oven in operation The heat source comprises an element located at the bottom of the oven; the air is sucked up by a central fan and redistributed on the sides.
ACCESSORIES Reversible oven shelf By using this shelf the other way up you gain extra height inside the oven. Special grilling shelf The bars are close together so that smaller pieces of food do not fall through. Enamelled drip-pan This is used to collect cooking juices. Don’t cook roasts actually in the drip pan, as this may produce considerable splashing and smoke. Enamelled cake tray For cooking pastry (biscuits, leavened bread, fruit tarts, etc.
HOW TO U SE T HE P YRO-C C LEAN P ROGRAM What is pyro-cleaning? - Pyro-cleaning involves cleaning the oven by heating to a high temperature (pyrolysis) in order to remove grime and dirt inside the oven caused by splashing or dripping during cooking. The smoke and smell this produces are removed by being passed through a catalyst. The oven has three pyro-clean cycles (Model UMP 50*) suited to all situations - An economic cycle that lasts 1h30 (the oven is locked for 2 hours to allow for cooling down).
HOW TO U SE T HE P YRO-C C LEAN P ROGRAM How to use the pyro-clean program Model UMP 50* a)Remove any accessories from the oven and wipe off any excess grime. b) Check that the programmer displays normal time and that it is not flashing. c) Press the program selection touch control until the "Pyro-clean" program appears Your oven has 3 pyrolysis symbols that correspond to 1 two-hour pyro. (Non-adjustable). You can select the two other cycles ( pressing the 1h45, or 1h30) non-adjustable, by -ou +.
HOW TO U SE T HE P YRO-C C LEAN P ROGRAM how to use the pyro-clean program Model UMP 51* a)Remove any accessories from the oven and wipe off any excess grime. b) Check that the programmer displays normal time and that it is not flashing. c)Press the program selection touch control until the "Pyro-clean" program appears. Your oven displays the pyro-clean symbols Control". You can select the another cycle ( and Ctl corresponding to "Pyro 2h) non-changeable, by pressing the + touch control.
FOR THE FITTER As a specialist, you alone are competent to install and connect up De Dietrich appliances. Our guarantee therefore applies only and exclusively to appliances which have been installed and connected up by you in accordance with the provisions of current regulations. Failure to meet this requirement would incur the fitter’s liability and release the De Dietrich company from any liability. 1.
FOR THE FITTER 3. Installing a built-in unit The oven has an high-performance air circulation system which gives remarkable results for cooking and cleaning, as long as the following points are applied: The oven may be fitted either underneath a work surface or in a suitable sized column unit. Cut a hole measuring 50 mm x 50 mm in the back wall of the insert space for the electric cable to pass through (see diagram below).
HOW TO CHANGE THE LIGHT BULB The bulb is located in the top of the oven. W ARNING! Disconnect the oven before touching the bulb; leave the oven to cool down if necessary a) Turn the cover a quarter turn to the left. b) Unscrew the bulb, turning it to the left. Type of bulb: - 15 W - 220/240 V - 300 C - E14 fitting bulb fitting c) Change the bulb, replace the cover and re-connect the oven to the power supply. unscrew cover Hint: Using a rubber glove makes it easier to unscrew the cover and the bulb.
MINOR T ROUBLESHOOTING If you’re not sure that your oven is working properly, it doesn’t necessarily mean that there’s a problem. In all cases, check the following points: IF YOU REALIZE THAT POSSIBLE ● ● CAUSES The oven isn’t connected to the power supply. The fuse has blown. The oven isn’t heating ● ● The temperature selected is too low. Other causes. - Connect to power supply. - Change the fuse, checking that it is 16A. - Increase the temperature selected. - Contact the After-Sales Service.
