5713216881/09.
Instructions for use. Keep these instructions Mode d’emploi. Conservez cette notice Instrucciones para el uso . Repase y guarde estas instrucciones. Lea cuidadosamente este instructivo antes de usar su aparato Register this product on-line and receive a free trial issue of Cook’s Illustrated. Visit www.delonghiregistration.com. Visit www.delonghi.com for a list of service centers near you. Enregistrez ce produit en ligne et recevez un numéro gratuit de Cook’s Illustrated. Visitez www.delonghiregistration.
C C1 C2 CLEAN C3 C4 C5 D D2 D3 D1 D5 D6 D4 D7 D8 D9 2 D10
A A1 A14 B A5 A2 A6 A3 A4 A7 A13 A12 A11 A8 A10 A9 B B2 B8 B1 B7 B4 B10 B3 B9 B6 B12 B5 B11 3
17 OZ / 0.
CLEAN 22 23 24 25 28 26 27 30 31 29 32 5
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: • Read all instructions. • Do not touch hot surfaces. Use handles and knobs. • To protect against fire, electrical shock and personal injury, do not immerse cord, plug or appliance in water or other liquid. • Never allow the appliance to be used by children. • Unplug from the outlet when not in use and before cleaning.
Functioning lights en Lights Operation Meaning of lights Turn on from general ON/OFF switch, at the back of the appliance. The appliance performs a self-test, signalled by the sequential flashing of lights. The appliance is on: no accessory is connected to coupling A2. The appliance is heating up to make coffee: when the 1 or 2 cup lights stop flashing, the appliance has reached the ideal temperature to deliver coffee. The appliance is on: the hot water spout D7 is connected to coupling A2.
Description en Description of appliance (page 3 - A ) A1. Cup holder/Warming plate A2. Water spout/milk container coupling A3. General ON/OFF switch A4. Power supply cable socket A5. Boiler outlet/Infusion assembly A6. Water tank seat A7. Water tank lid A8. Water tank with seat for water filter A9. Water refill indicator A10. Drip tray A11. Indicator for drip tray maximum water level A12. Cup tray A13. Sliding tray for long coffee/latte macchiato glass A14. Cup warmer button D7.
Instructions for use en Activation of the water filter and filling of the water tank • Remove the filter from the packaging and rinse it with about 17 OZ / 0.5 L of running water (fig. 2). • Turn the calendar disc (see fig. 3) until the following 2 months of use are displayed. Please note the filter has a two month duration if the appliance is used normally, whereas if the machine remains unused with the filter installed, it has a maximum 3 month duration.
Instructions for use en • 2. Completely dip the strip into a glass of water for one second. 3. Remove the strip from the water and shake it slightly. After about one minute 1, 2, 3 or 4 red squares form, depending on the hardness of the water (4 red squares = very hard water). 4. Access the programming menu. 5.
Instructions for use en • • • • • Position the cup under the filter-holder spouts. It is advised to heat the cup before making the coffee, rinsing it with hot water. Ensure the lights relative to the coffee buttons are on, press the coffee button : the appliance proceeds and interrupts automatically. exceeding the maximum of 0.5 l (fig. 18). Remember that every notch on the side of the container corresponds to 100 ml of milk.
Instructions for use en 2. Place a cup or other container under the milk spout tube. 3. Keep the “CLEAN” button (fig. 25) pressed: lights and flash. When the lights stop flashing and the appliance goes back to ready for use, release the “CLEAN” button: the steam cleans the circuits inside the milk frother. 2. Keep the button pressed. 3. When the hot water in the cup reaches the required level, release the button. Programming is confirmed by the lights flashing for three seconds.
Instructions for use en Descaling Descale the machine when the light flashes on the control panel. Proceed as follows: 1. Remove the water filter. Fill the tank with the descaling solution obtained by diluting the descaler with water as indicated on the descaler pack. 2. Insert the hot water spout (fig. 8). 3. Place one container under the boiler outlet and one under the hot water spout (fig. 31) and ensure the drip tray is empty and correctly inserted. 4.
Troubleshooting Problem Possible causes Solution The device will not switch on The power supply cable is not inserted correctly Check that the power supply cable connector is fully inserted in the appropriate socket on the back of the device; then check that the plug is correctly connected to the power outlet Espresso coffee does not flow out No water in the tank Fill the water tank The holes in the filter-holder are blocked Clean the holes in the filter-holder spouts The espresso boiler outlet i
Troubleshooting en Problem Possible causes Solution The coffee cream is dark (it flows slowly from the spout) The ground coffee is too tightly pressed Press the coffee less Large amount of ground coffee Decrease the amount of ground coffee The espresso boiler outlet is blocked Perform cleaning as indicated in the section “cleaning the boiler outlet” (page 13) The filter is blocked Perform cleaning as indicated in in the section “cleaning the filter” (page 13) The coffee is too finely ground On
Limited warranty This warranty applies to all products with De’Longhi or Kenwood brand names. What does the warranty cover? We warrant each appliance to be free from defects in material and workmanship. Our obligation under this warranty is limited to repair at our factory or authorized service center of any defective parts or part thereof, other than parts damaged in transit. In the event of a products replacement or return, the unit must be returned transportation prepaid.