5713229381/07.16 - Printed in Italy De’Longhi Appliances via Seitz, 47 31100 Treviso Italia www.delonghi.
ECAM45.76X COFFEE MAKER Instructions for use. Keep these instructions Visit www.delonghiregistration.com to register your product Visit www.delonghi.com for a list of service centers near you. ELECTRIC CHARACTERISTICS 120 V~ 60 Hz 1250 W MACHINE À CAFÉ Mode d’emploi . Conservez cette notice Visitez www.delonghiregistration.com pour enregistrer votre produit en ligne. Visitez www.delonghi.com pour y voir une liste des centres de réparation proches de chez vous.
EN FR ES page 6 page 25 pàg.
A1 A2 A19 A3 A5 A4 A6 B A7 A8 A15 A14 A9 A18 A10 A17 A11 A12 A13 3 A16
1 2 100 3 4 ml 5 6 7 8 9 10 11 12 13 14 15 16 4
17 20 19 18 MIL K A B 21 22 23 25 26 27 29 30 31 5 24 28A 28B 32
CONTENTS 1. IMPORTANT SAFEGUARDS...........................7 9. MAKING CAPPUCCINOS AND MILK-BASED COFFEES................................................... 14 9.1 Filling and attaching the milk container.......14 9.2 Adjusting the amount of froth......................14 9.3 Making cappuccinos and milk-based coffees automatically...............................................14 9.4 Preparing “MILK MENU” drinks.....................15 9.5 Cleaning the milk container after every use.15 9.
1. IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following. • Read all instructions carefully. • Make sure the voltage of your electrical system corresponds to the voltage shown on the bottom of the machine. • Do not touch hot surfaces. Use handles or knobs. • To protect against fire, electrical shock and personal injury, do not immerse cord, plug or appliance in water or other liquid.
2. INTRODUCTION 3. DESCRIPTION 3.1 Description of the appliance Thank you for choosing the ECAM45760 automatic coffee and cappuccino maker. We hope you enjoy using your new appliance. Take a few minutes to read these instructions. This will avoid all risks and damage to the machine. 2.1 (page 3 - A ) A1. Beans container lid A2. Pre-ground coffee funnel lid A3. Beans container A4. Pre-ground coffee funnel A5. Grinding adjustment dial A6. Cup warmer shelf A7. Coffee spout (adjustable height) A8.
3.3 Description of the accessories If the power socket does not match the plug on the appliance, have the socket replaced with a suitable type by a qualified electrician. (page 2 - C ) C1. “Total Hardness Test” indicator paper C2. Pre-ground coffee measure C3. Descaler C4. Water softener filter (certain models only) C5. Cleaning brush C6. Cappuccino maker/hot water spout C7. Cappuccino maker/hot water spout release button 3.4 4.
5. TURNING THE APPLIANCE ON To enable the function, proceed as follows: 1. Press the MENU/ESC button (B14) to enter the menu; 2. Press < (B4) or > (B8) (fig. 9) until “Rinsing” appears on the display (B13); 3. Press the OK button (B12-fig. 10): the message “Confirm?” is displayed; Please note! Before turning the appliance on, make sure the main switch (A19) is pressed (fig. 2). Each time the appliance is turned on, it performs an automatic preheat and rinse cycle which cannot be interrupted.
7.6 Auto-start 4. Press the OK button to enable or disable the cup warmer (the message “Cup warmer Enabled” indicates that it is active); 5. Press the MENU/ESC button to exit the menu. Warming the cups keeps the coffee hot. You can set the auto-start time in order to have the appliance ready at a certain time (for example in the morning) so you can make coffee immediately. Please note! To enable this function, the time must already be set correctly. 7.9 To enable auto-start, proceed as follows: 1.
7.12 Setting the language - how many times the water softener filter has been replaced. 5. Press the MENU/ESC button twice to exit the menu. To modify the language of the display (B13), proceed as follows: 1. Press the MENU/ESC button (B14) to enter the menu; 2. Press < (B4) or > (B8) (fig. 9) until “Set language” is displayed; 3. Press the OK button (B12- fig. 10); 4. Press < or > until the required language is displayed; 5. Press the OK button to confirm; 6.
8.4 Adjusting the coffee mill • While the machine is making coffee, delivery can be interrupted at any moment by pressing any button. • At the end of delivery, to increase the quantity of coffee in the cup, just press (within 3 seconds) one of the coffee buttons ( or ) (fig. 17). Once the coffee has been made, the appliance is ready to make the next drink. The coffee mill is set by default to prepare coffee correctly and should not require regulating initially.
8.9 Making LONG coffee using pre-ground coffee • Follow the instructions in points 1, 2, 3 and 4 of the section “8.7 Making coffee using pre-ground coffee”, then press the button (B9- fig. 19). The appliance starts making coffee and “LONG COFFEE FUNCTION” appears on the display (B13), together with a progress bar which fills gradually as preparation proceeds. Halfway through preparation, the message “ADD PRE-GROUND COFFEE, Press OK” appears.
4. After a few seconds, frothed milk is delivered from the milk spout (D5) into the cup below. Then the machine automatically makes the coffee after delivering the milk. 9.4 4. Turn the dial back to one of the froth selections. 5. Remove the milk container (D) and always clean the hot water/steam connection nozzle (A8) with a sponge (fig. 27).
7. Once the required quantity of coffee has been delivered into the cup, press the OK button again. Coffee delivery stops. The machine is now reprogrammed with the new milk and coffee quantities. 3. Press the button (B8). After a few seconds, the steam to heat the liquid comes out of the cappuccino maker/hot water spout and “STEAM” is displayed. 4. When the required temperature is obtained, interrupt steam delivery by pressing the button again.
11. CLEANING 11.1 Cleaning the machine To clean (with the machine on): • Remove the drip tray (A12) (fig. 31), empty and clean. • Empty the grounds container (A10) and clean thoroughly to remove all residues left on the bottom. This can be done using the spatula on the brush (C5) provided. • Check the condensate tray (A9) and empty if necessary (fig. 32).
2. Remove all the residues with a vacuum cleaner (fig. 34). 4. Press the two coloured release buttons inwards and at the same time pull the infuser outwards (fig. 37); 5. Soak the infuser in water for about 5 minutes, then rinse under the tap. 11.6 Cleaning the water tank 1. Clean the water tank (A16) regularly (about once a month) and whenever you replace the water softener filter (C4) (if provided) with a damp cloth and a little mild washing up liquid. 2.
11.10 Cleaning the milk container 12. DESCALING To keep the frother efficient, clean the milk container (D) every two days as described below: 1. Remove the lid (D2). 2. Remove the milk spout (D5) and intake tube (D4). 3. Turn the froth regulator (D1) to the “INSERT” position (fig. 41) and pull it off upwards. Descale the machine when the message “DESCALE” flashes on the display (B13). • • Important! Before use, read the instructions and the labelling on the descaler pack.
13.1 Measuring water hardness played and the descaling procedure begins. The descaler liquid comes out of the caffee spouts and hot water spout and a series of rinses and pauses is performed to remove limescale deposits from inside the machine; After about 25 minutes, descaling stops and the messages “RINSING” and “FILL TANK” alternate on the display; 10. The appliance is now ready for rinsing through with clean water. Empty the container used to collect the descaler solution.
14.2 Replacing the filter 3. To activate the filter, run tap water through the hole in the filter as shown in the figure until water comes out of the openings at the side for more than a minute (fig. 47). When “REPLACE FILTER” appears on the display (B13), after two months (see date indicator) or when the appliance has not been used for 3 weeks, you should replace the filter (C4): 1. Extract the tank (A16) and exhausted filter; 2.
16. DISPLAYED MESSAGES DISPLAYED MESSAGE POSSIBLE CAUSE SOLUTION FILL TANK Insufficient water in the tank (A16). Fill the tank with water and/or insert it correctly, pushing it as far as it will go until it clicks into place. EMPTY GROUNDS CONTAINER The grounds container (A10) is full. Empty the grounds container and drip tray (A12), clean and replace (fig. 31). Important: when removing the drip tray, the grounds container MUST be emptied, even if it contains few grounds.
INSERT TANK The tank (A16) is not correctly in place. Insert the tank correctly and press as far as it will go. GENERAL ALARM The inside of the appliance is very dirty. Clean the inside of the appliance thoroughly, as described in section “11. CLEANING”. If the message is still displayed after cleaning, contact a service centre. EMPTY CIRCUIT FILL CIRCUIT alternating with HOT WATER Press OK The water circuit is empty Press OK (B12- fig.
The coffee is delivered too slowly or a The coffee is ground too finely. drop at a time. Turn the grinding adjustment dial (A5) one click clockwise towards "7" while the coffee mill is in operation (fig. 14). Continue one click at a time until coffee delivery is satisfactory. The effect is only visible after delivering 2 coffees (see section “8.4 Adjusting the coffee mill”). Coffee does not come out of one or The coffee spouts (A7) are blocked. both of the spouts.