instructions RETRO OIL FILLED RADIATOR MTR2000 Please retain these instructions for future reference
Indicator light Carry handle Display Switch Thermostat knob 1 1 1 1 1 1 Cord storage Fig.
Thank you for choosing this De’Longhi radiator. To get the very best out of your new radiator it is advisable to read these instructions before using it.This will ensure that you gain optimum results and use the appliance safely. General instructions 1. Take the radiator out of its packaging and remove any polystyrene pieces or any other packaging material that might be lodged inside it. 2. Check that neither the radiator nor the power cable has been damaged in any way during transportation. 3.
How to switch the radiator off To switch the radiator OFF position the switch in the "0" position (in the middle position). Adjusting the thermostat When the room has reached the desired temperature, turn the thermostat knob slowly in an anticlockwise direction until you hear a click and the radiator turns off (indicator light off).The thermostat will now keep the temperature in the room constant, turning the heater on and off as appropriate.
- The heater must never be placed immediately under a fixed mains socket. - When scrapping the radiator, respect legislation on the disposal of oil. - The use of an extension lead is not recommended, however if it is necessary then follow carefully the extension lead’s instructions, and most importantly ensure that the extension lead is correctly rated in accordance with the radiator being used and NEVER overloaded.
Warning - this appliance must be earthed Green and Yellow to Earth 13 amp Fuse Brown to Live Blue to Neutral Cord Clamp Electrical requirements Before using this appliance ensure that the voltage indicated on the product corresponds with the main voltage in your home, if you are in any doubt about your supply contact your local electricity company. The flexible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 13 amp capacity.
5785012900/04.
