Operation Manual

ENGLISH
31
5) SERVICE
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Additional Safety Instructions for
Rotary Hammers
Wear ear protectors. Exposure to noise can
cause hearing loss.
Use auxiliary handle (c), if supplied with the
tool. Loss of control can cause personal injury.
Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. Cutting
accessory contacting a “live” wire may make
exposed metal parts of the power tool “live” and
could give the operator an electric shock.
Residual Risks
The following risks are inherent to the use of rotary
and chipping hammers:
Injuries caused by touching the rotating parts or
hot parts of the tool
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
Impairment of hearing.
Risk of squeezing fingers when changing the
accessory.
Health hazards caused by breathing dust
developed when working in concrete and/or
masonry.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual
before use.
Wear ear protection.
Wear eye protection.
Clutch Setting 40Nm is designed for
most drilling applications.
Clutch Setting 80Nm is designed for
higher torque applications.
Red service indicator LED. For detailed
description see under Service Indicator
LED's.
Yellow service indicator LED. For detailed
description see under Service Indicator
LED's.
DATE CODE POSITION (FIG. 1)
The date code (w), which also includes the year of
manufacture, is printed into the housing.
Example:
2013 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Rotary hammer
(D25501, D25601, D25602, D25603)
or
1 Chipping hammer (D25820, D25831)
1 Side handle
1 Kitbox (K-models only)
1 Instruction manual
1 Exploded drawing
Check for damage to the tool, parts or
accessories which may have occurred during
transport.
Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1A, 1B, 2A, 2B)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Trigger switch (D25501, D25601, D25602,
D25603)
On/off rocker switch (D25820, D25831)
b. Lock-on slider (D25601, D25602, D25603)
c. Side handle
d. Main handle
e. Active vibration control (D25601, D25602,
D25603, D25831)
f. Mode selector switch
g. Electronic speed and impact control dial
(D25601, D25602, D25603, D25831)
h. Clamp wheel