Certificate

@128 followed by -500, -508, -750 or -762, followed by 02 thru 99, followed by J, followed by one thru eight
alphanumeric digits or blank.
@129 followed by one to six alphanumeric digits or blank.
@130 followed by one to eight alphanumeric digits or blank.
@131 followed by -250, followed by 02 thru 12, followed by one thru eight alphanumeric digits or blank.
@132 followed by 02-15, followed by U, followed by 02-15, followed by 0-6 alphanumeric digits.
@133 followed by 02 thru 22, followed by B, E, K, G, O, R, W or blank, followed by A, B or blank, followed by one thru
eight alphanumeric digits or blank.
@134 followed by 02 thru 11, followed by B, E, K, G, O, R, W or blank, followed by one thru eight alphanumeric digits
or blank.
Note 1 - For Pole 2 thru Pole 4 of Cat. No. OTA3001, the wiring methods are as the following. The jumper for Pole 2 and
Pole 3 will not be withdrawn during normal operation.
Note 2 - The terminal blocks are constructed end to end stackable design, which may be assembled 4 thru 99 poles. The
suitability of the assembly shall be determined in the end-use investigation.
Marking: Company name or tradename "DECA" and catalog designation.
 2013 UL LLC
When the UL Leaf Mark is on the product, or when the word "Environment" is included in the UL Mark, please search
the UL Environment database
for additional information regarding this product's certification.
The appearance of a company's name or product in this database does not in itself assure that products so identified have
been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be
Certified and covered under UL's Follow-Up Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following
conditions: 1. The Guide Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be
presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The
statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the
extracted material. In addition, the reprinted material must include a copyright notice in the following format: "c 2013 UL
LLC".
Wiring
Method
Pole 2 front Pole 3 front Pole 4 front Pole 2 back
Pole 3 and
Pole 4 back
1 One unprepared
conductor
N/A One unprepared
conductor
Soldering
post
One prepared
conductor
2 N/A One unprepared
conductor
One unprepared
conductor
Soldering
post
One prepared
conductor
Last Updated
on 2013-12-20
Questions? Print this page Terms of Use Page Top
第 33 頁，共 33 頁XCFR2.E167040 - Terminal Blocks - Component
2014/2/18file://W:\外銷
\
UL及VDE安規認証資料\最新端子台ul認証清單.htm