User's Manual

13
WARNINGS
• Do not place the G3™ components in
locations that will obscure the driver’s view of the road.
• Double-check each component to ensure it is securely
mounted. In an accident, a loose component could
strike an occupant of the vehicle.
• Do not place the G3 ™ computer, antennas, cables, or
brackets in your vehicle’s air bag deployment zones.
Refer to your vehicle’s owner’s manual or call the vehicle
manufacturer if you are unsure where the air bag
deployment zones are.
Then attach and secure the connectors with the thumbscrews on the
sides of each cable connector.
Figure 2.1d
Secure the connecting cable by tightening the
thumbscrews into the standoffs.
To return the unit to a one-piece configuration, remove the cables
and standoffs, line up the 9-pin connectors, push the two pieces
together and secure with the two retaining screws.
2.2 Mounting and Connecting the Computer/Display.
G3™ User & Installation Manual