User's Manual

20
WARNING
• Before connecting the VIP™, ensure all devices,
including the vehicle and radar are powered off.
4. If the unit displays a reading, reposition the antenna to eliminate
it. Often, the far-left corner of the front windshield is an
interference-free zone where you can place an antenna.
5. Repeat this process for the rear antenna.
2.5 VIP Installation (Option)
If your G3 has come with the optional Vehicle Interface Portal™
(VIP™) then use the following installation instructions.
2.5.1 Connecting to the Radar
Connect the VIP's™ communications cable to the G3™
communication port located on the back panel of the radar unit.
This port is a DB-9 female connector labeled “SERIAL”. Ref er t o
the pic ture in Figur e 2 . 5 . 1 .
Figure 2.5.1a
VIP connection to Radar
G3 ™ User & Installation Manual