User's Manual

25
The radar unit will not begin transmitting until you press an antenna
button. The antenna (ANT) buttons, up arrow (FRONT) and down
arrow (REAR), on the IR remote activate and deactivate the antennas.
The FRONT or REAR icons will illuminate when that particular antenna
is transmitting.
Figure 3.2b
The FRONT or REAR light illuminates when that antenna is transmitting.
To discontinue transmitting (to place the radar back into standby
mode), press the same (ANT) button.
The G3™ has three main operating modes: Stationary, Moving Mode
Opposite Direction, and Moving Mode Same Direction.
3.3 Stationary Mode
You can use Stationary Mode to monitor traffic that is moving toward
or away from the parked patrol vehicle.
G3 ™ User & Installation Manual