User's Manual

28
After the “Stationary Both” mode has been selected, briefly
press and release the MODE button a second time to select the
“Stationary Approach” mode. Pressing and releasing the MODE
button a third time will select the “Stationary Recede” mode.
Pressing and releasing the MODE button a fourth time will cycle
to the moving opposite mode of operation.
When the radar is toggled into the “Stationary Approach” mode,
the down pointing or up pointing arrow to the right of the
TARGET window will illuminate. (When using the FRONT antenna,
targets approaching the patrol will be represented by the arrow
pointing down. An arrow will be poin ting up when the REAR
an t enna is selec t ed . )
Figure 3.3.1c
While the FRONT antenna is selected, the down pointing arrow is
illuminated while tracking an approaching vehicle.
Figure 3.3.1d
While the REAR antenna is selected, the up pointing arrow is
illuminated while tracking an approaching vehicle.
G3™ User & Installation Manual