User's Manual

34
3.7 Lock a Speed
Pressing the LOCK button transfers the target speed and direction
information related to that target from the TARGET window to the
LOCKED window. After locking the speed, the radar unit continues to
process speeds and display target speeds in the TARGET window. This
lets you continue to track the history of the target.
To clear a locked speed do one of the followingays:
• Press the LOCK button when an antenna is transmitting and no
target is present.
• Change the operating mode.
• Turn the antenna off then on again.
3.8 Range Setting
You can adjust the range (sensitivity) of the G3™ in each of the three
operating modes independently:
• Moving Opposite Mode
• Moving Same Lane Mode
• Stationary Modes
The G3™ can track the speed of targets that exceed 3000 ft. when
the unit is set at maximum range. The range setting is available in
the main menu location. To change the range setting for a particular
mode, press the MENU button on the IR remote. Radar will display:
• The locked speed will remain as tracking history when
you change a dual-antenna transmission status from
front to rear or rear to front.
• You may use the lock feature even when the radar is in
Faster mode.
G3 ™ User & Installation Manual