User's Manual

35
Figure 3.8a
The G3™ front display showing range or sensitivity setting.
Press the FRONT antenna (+) or REAR antenna (-) to increase or
decrease the range setting. The range value on the far right PATROL
display will change. The maximum range setting is 5 while the
minimum is 1. Initially, you will want to start with maximum range,
then decrease the range setting until you obtain a desired
performance level. For example, an officer would usually reduce
range when operating within a city environment. Pressing the MENU
button again will exit the main menu and save the range setting. The
range setting for each operating mode will be permanently saved
when the radar is powered off.
G3 ™ User & Installation Manual