User's Manual

42
6.1 Control Buttons
POWER (PWR): powers the G3™ off. The G3™ will save all user settings on power
down.
OPTION (OPTN): Depending on the state of the radar.
(1) If not in MENU mode, pressing OPTION allows the radar
to be set to City/Highway mode which helps reduce
shadowing (See S ection 8 . 2 . 9) b y setting a diff er en t
minimum pa tr ol speed f or city and highway speed
conditions. This option works only while the unit is set in
a moving mode of operation. (The optional VIP interface
will override this setting) When you press the OPTN
button, CTY will briefly appear in the center (LOCKED
WINDOW). While in this mode, the radar can track
patrol speeds down to 5 mph. Pressing OPTION again
will place the radar into HIGHWAY mode where HWY will
be briefly displayed. While in this mode, the patrol will
be limited to tracking below 20 mph. The radar will
power up with the settings you select.
(2) If in MENU mode, pressing the OPTION cycles through a
list of changeable settings in the primary menu. See
section MENU below for the complete list.
• The IR remote control needs to be aimed in the general
direction of the radar display to properly receive the IR
signals. To help increase IR signal levels, the IR remote
as a total of three transmitting devices. A transmitting
device is located on the front near the FAST button
while the other two are located on the front edge.
G3™ User & Installation Manual