User's Manual

TEST (TEST): Pressing the TEST button starts an extensive self-test of

the radar unit’s circuitry.

During self-test, the system will not power

down until the test is complete.

If the self-test fails, the SYSTEM ERR

message will appear in the radar windows.

For more information on

tests, see Section 9: Field Tests.

Pressing and holding the test button while in same direction mode,

activates the special FORK TEST mode.

This feature allows the

operator to test the directional radar antenna with a tuning fork.

VOLUME: The 8-step volume control regulates the Doppler audio

and system status tone (beep) volume. Every press of the button

increments the positive (+) side of the volume. When the maximum

volume level has been reached, the next button press will reset the

level back to minimum.

FAST (FAST): Controls the Faster/Fastest Mode feature when you are

evaluating multiple targets or use the FAST button when testing the

antenna is same direction mode with a FORK.

MODE (MODE): Switches between the three operating modes:

Stationary Mode, Moving Mode Opposite Direction, and Moving

Mode Same Direction.

LOCK (LOCK): Transfers the target speed and direction indicators in

the TARGET window to the LOCKED window.

After locking the speed,

the system continues to process and display target speeds in the

TARGET window, so you can continue to track the history of the

target speed.

If you have the Patrol Speed Lock, Recall, and Blanking

option, pressing the LOCK button locks both the target and patrol

speed.

ANTENNA (ANT) FRONT and REAR: Activates and deactivates the

front and rear antenna.

An antenna must be activated to track a

G3™ User & Installation Manual