User's Manual

47
(i) HARMNC - HARMONIC DISPLAY
Allows radar to be set to display “H” in LOCKED window
during a harmonic event. Press the front or rear antenna
button to toggle between off and on.
Figure 6.1i
The G3™ front display showing menu
Harmonic option selection display.
(j) SDSS – SAME DIRECTION SPEED SEPERATION SETTING
Allows radar to be set to the minimum speed separation
for same direction. Allowable selections are 3, 5 and 8
mph separation. Press the front or rear antenna button
to toggle between the selections. The default value is 3.
Figure 6.1j
The G3™ front display showing menu
SDSS option selection display.
PATROL SPEED LOCK, RECALL and BLANKING [OPT]: This option locks the
patrol speed at the time you lock the target speed.
1. In either moving mode, press the LOCK button to lock both the
target or patrol speeds.
2. Turn the antenna off. The locked patrol speed will appear in the
PATROL window.
3. To blank the patrol speed, press the OPTN button. Then press the
OPTN button again to recall it.
4. To permanently remove the locked patrol speed, reactivate the
antenna by turning it on.
G3 ™ User & Installation Manual