User's Manual

Appendix B Menu Feature

The menu feature allows the operator to fine tune some of the

settings of the radar. To activate the menu feature, press and hold

the TEST button down until MENU is displayed in the mode window.

Pressing OPTN steps through the menu items and the antenna

buttons change the settings. Pressing the TEST button again exits the

menu feature and saves the settings.

Feature Setting Function

LOSP 2, 15 (mph) Low Speed - Minimum speed that the 4, 25

(km/h) radar will process in stationary mode.

Default is 15 mph (25 km/h).

BEEP ON, OFF Beep - Beeps when button is pushed on

the hand remote. Default is ON.

UNTS MPH, KPH Display units - Measure speeds in mph

or km/h

Factory set based on order.

COMX 0 through 5 Serial Port Communication Protocol -

Selects protocol for interfacing to MDT,

signs, etc.

- no output

1 - Decatur format

2, 3, 4, 5 - Reserved (no output)

Default is 1.

FSTL ON, OFF Fast Lock - Allows the locking of a target

if FAST mode is active

Default is ON.

HAR ON, OFF Harmonic Indicator - The radar displays

“_H_” in the target window in the

presence of a patrol harmonic. If turned

off, the target window is blank.

Default is ON.

SDSS 3, 5, 8 (mph) Same Directions Separation Speed -

4, 8, 12 (km/h) Sets the minimum separation speed that

the radar will process in Same Direction.

G3 ™ User & Installation Manual