User Manual

ManualsBrandsDecibullz ManualsAll HeadphonesDecibullz - Custom Moldable Wireless Earbud Headphones - Black

Heat

Shape

For the best molding experience watch our instructional

videos at:

www.decibullz.com/wireless-instructions

The molding process is time sensitive. Read through

these instructions before starting.

Clean ears thoroughly. Pull back hair and remove any

jewelry that may interfere with the molding process.

BEFORE MOLDING

MATERIALS NEEDED

WARNING!

The molding process involves heating

your molds and forming them to your

ears. DO NOT PLACE THE HOT MOLD

INTO YOUR EAR. Wait until the mold is

warm and pliable.

-Decibullz Wireless -Silicone Tips

-Boiling water -Metal spoon

-Glass or ceramic cup -Timer

-Metal pan (stovetop) -Mirror (optional)

decibullz

CUSTOM MOLDED

WIRELESS

INSTRUCTIONS

ENJOY YOUR DECIBULLZ!

Attach correct size silicone tips to

mold. (g. 1)

You can change the tips after the molding

process is complete.

Boil water, remove from heat.

(g. 2)

If using the microwave use a glass or

ceramic cup. Do NOT place the mold in the

microwave with the water.

Place ONE mold in the hot water.

Multiple molds WILL stick together

if heated at the same time. Let sit

for 5 minutes. (g. 3)

Remove mold with metal spoon

and let cool for 30 seconds. (g. 4)

CAUTION: ITEMS MAY BE VERY HOT.

Be sure to use a metal spoon, the mold may

stick to plastic.

Plug earphone into back of mold.

(g. 5)

Insert mold and earphone into ear.

(g. 6)

Gently press mold to ll concha

(bowl) of ear. (g. 7)

CAUTION: DO NOT PLACE THE MOLD

INTO EAR WHILE IT IS HOT. WAIT UNTIL

THE MOLD IS WARM AND PLIABLE.

Tips: Use a mirror to help. To ensure a

smooth looking mold avoid using your n-

gernails, also avoid “overmolding,” gently

push in with the pad of your nger.

Let cool for 5 minutes, repeat with

the other mold and ear. (g. 8)

Remolding

To re-t, remove the mold from the

earphone. Place the mold back in

boiling water for 1-2 minutes then

repeat the shape process.

Excessive heat can deform the molds.

Be careful not to leave earphones in

the car or any other place that could

expose them to excessive heat. Molds

MAY melt and can adhere to upholstery.

Concha

g. 1

g. 2

g. 4

g. 5

g. 6

g. 7

g. 3

g. 8

Summary of content (2 pages)

PAGE 1
decibullz Heat Shape 1 5 Attach correct size silicone tips to mold. (fig. 1) You can change the tips after the molding process is complete. Plug earphone into back of mold. (fig. 5) fig. 1 Insert mold and earphone into ear. (fig. 6) fig. 5 fig. 6 6 2 CUSTOM MOLDED WIRELESS INSTRUCTIONS WARNING! The molding process involves heating your molds and forming them to your ears. DO NOT PLACE THE HOT MOLD INTO YOUR EAR. Wait until the mold is warm and pliable. Boil water, remove from heat. (fig.
PAGE 2
Charging your Headset 1. Prior to using your headset for the first time, or after no use for an extended time, fully charge the battery. 2. Approx. 1 hour is required to fully charge the battery. 3. The indicator light turns red while charging and will automatically turn blue when fully charged. 4. When battery is low the indicator light will flash red. (Headset will turn off automatically when the battery is fully drained.) 5. Headset can be used while charging.