Use and Care Manual

Operation
1
Setting Up and Operating One Speaker
□ Every speaker is preset to “OFF” position. Push the power button on the control box to turn the speaker ON.
□ It makes a “Do” tone, and the Bluetooth LED indicator light on the control box will flash BLUE. The speaker is now
in discovery mode and is discoverable by your personal Bluetooth-enabled music device.
□ Follow the instructions on your personal music device to set it to discovery mode, connect it to the Bluetooth
name “Creative”. When the speaker is successfully connected to your personal music device, a “Do” tone will be
heard and the Bluetooth LED indicator light will turn to steady BLUE.
□ Open your media player and press PLAY. Once playback begins, you can control the music and volume from
your connected device. Playback time on fully charged battery is approximately 10 hours, depending on music
level and other factors.
□ If you take your Bluetooth device out of range of the speaker (30 feet or 10m), and return back within the
receiving range in a short time, your device will be automatically connected to the speaker. If you return back
within the receiving range for a long time, you may need to repeat the above steps to reconnect your device to
the speaker.
2
Setting Up and Operating Two Linked Speakers
□ Our speakers are One-to-One randomly linkable. If you purchase two of our linkable speakers, follow the below
steps to set up the speakers.
□ Push the power button on the control box to turn both speakers ON. By Default, your speakers will pair with each
other automatically, otherwise you may follow the easy steps below to pair them manually.
NOTE: Keep the speakers and Bluetooth-enabled device within 3 feet of each other during the pairing process,
and the speakers must be unpaired from the device before starting.
□ After turn on both speakers, you will see flashing BLUE indication light on each speaker.
□ Double-click the pairing button on each speaker at the same time. You will hear a “Do” tone from each speaker,
and one of the speaker’s Bluetooth indicator light will keep flashing BLUE, and then the other speaker’s Bluetooth
indicator light will turn to steady BLUE. Now these 2 speakers are successfully paired, and are in discovery mode
and are discoverable by your personal Bluetooth-enabled music device.
□ Follow the instructions on your personal music device to set it to discovery mode, connect it to the Bluetooth
name “Creative”. When the speakers are successfully connected to your personal music device, a “Do” tone will
be heard, and the flashing Bluetooth LED indicator light will also turn to steady BLUE.
□ Set the Speakers in your preferred location within 25 feet (8m) of each other
□ Open your media player and press PLAY. Once playback begins, you can control the music and volume from
your connected device. Playback time on fully charged battery is approximately 10 hours, depending on music
level and other factors.
□ If you take your Bluetooth device out of range of the speaker (30 feet or 10m), and return back within the
receiving range in a short time, your device will be automatically connected to the speaker. If you return back
within the receiving range for a long time, you may need to repeat the above steps to reconnect your device to
the speaker
NOTE: If you would like to pair the speaker to another device, you must unpair the speaker from the currently paired
device first. On your device’s Bluetooth settings, select “Creative”, then select unpair. When the speaker has been
unpaired, it automatically goes into pairing mode again。
NOTE: The Bluetooth pairing distance is about 30 ft., so keep the speaker within 30 ft. clear distance of your personal
Bluetooth-enabled music device.
NOTE: If your Bluetooth device is out of range of the far speaker (30 feet or 10m), the speakers will remain paired and
continue to play. However, if you take your Bluetooth device out of range of the near speaker, both speakers will no longer
be connected and stop playing.